Support road.cc

Like this site? Help us to make it better.

BUYER'S GUIDE

21 of the best bike pumps and CO2 inflators - find a way to raise the pressure

Buyer's guide to track pumps, frame pumps, mini pumps and CO2 devices

Let's get to grips with the world of bike pumps and CO2 inflators. We're going to cover track pumps, frame pumps, mini pumps and CO2 devices and we'll give you our choice of the best currently available.

  • You'll probably want to own at least two bike pumps: a track pump (aka floor pump) for home and a portable pump for out on the road

  • A decent basic floor pump is about £20; pay more and you get features like better gauges, multi-fit heads and the ability to blast air into a tubeless tyre to seat it

  • Pocket-sized mini-pumps are portable, but not exactly quick

  • Inflators that use CO2 cartridges are portable and quick, but cartridges are expensive

  • Full-size frame pumps are fairly quick to use, but take up space many bikes don't have spare

21 of the best pumps, CO2 inflators & accessories for 2020

The pneumatic tyre is one of mankind's greatest inventions, smoothing the ride and making bikes faster compared to the solid tyres that came before it. But it's also a pain in the neck, because it's vulnerable to punctures and gradually loses air while your bike is stored. At home and on the road, you need a a way to replace the lost air.

There are three broad types of tyre inflator: portable hand pumps that you take along on your rides; portable carbon dioxide canister devices; and floor pumps for workshop and trackside use. Hand pumps in turn divide into full-size frame pumps and minipumps that are small enough to fit in your jersey pocket. Let's take a look at all the options and variations.

Floor pumps

Also known as track pumps because they're the most common way to get the very high pressures used in track cycling, floor pumps make it easy to get air into your tyres. A floor pump has a handle to help you get your weight behind the job, feet that are big enough to stand on to hold it in place, and a gauge so you can get the pressure spot on.

The narrower the barrel of a floor pump, the easier it is to get high pressures, but it will take more strokes.

All track pumps have some sort of chuck to attach to the valve, but there are many different designs. Some use a universal mechanism that will fit Presta and Schrader valves, while others have a separate attachment for each type. Almost all have a lever to clamp the chuck round the valve.

There's some debate about where the pressure gauge should be. Some manufacturers put it at the top of the barrel, which makes it easier to read, others put it at the bottom because it's less likely to get damaged there if the pump falls over. If you go for pump with a high gauge, make sure it has some sort of protection against falls.

Some pumps are definitely more robust than others, which is why you'll see a fairly small selection of models being used in bike shop workshops. Very few can stand being accidentally kicked around, an inevitable part of workshop life for a floor pump.

Topeak Joe Blow Booster track pump and tubeless inflator — £105.83

Topeak Joe Blow Booster Review-101

Topeak's Joe Blow Booster is an easy to use, all in one solution for anyone that wants to seat tricky tubeless tyres or just inflate them, using a high-pressure reservoir to provide enough of a blast of air to get even the most stubborn rubber seated. It's expensive but it's the best all-in-one unit we've used, by some way.

Read our review of the Topeak Joe Blow Booster
Find a Topeak dealer

Birzman Maha Push and Twist II floor pump — £74.99

Birzman Maha Push and Twist II Floor pump.jpg

Birzman's Maha Push and Twist II Floor pump is a really high quality unit, and the new head is simple to use and effective for both Presta and Schrader valves. It's expensive, but a very nice thing and definitely worth a look if you're after a good-looking pump with performance to match.

Read our review of the Birzman Maha Push and Twist II
Find a Birzman dealer

Beto CJA-001S Tubeless Air Tank Inflator — £44.99

Beto CJA-001S Tubeless Air Tank Inflator.jpg

The Beto CJA-001S Tubeless Air Tank Inflator is a workshop-quality tubeless air tank with well-thought-out features and excellent performance. It should last you a lifetime of tubeless setup, road or mountain.

Read our review of the Beto CJA-001S
​Find a Beto dealer

Cannondale Airport Carry On Floor Pump — £39.99

Cannondale Airport Carry on Floor Pump.jpg

Most cyclists have a couple of bike pumps: a mini pump for road-side rescue and a track pump for home inflation. The cycling industry is nothing if not adept at creating niches, however, and the travelling track pump might be just such a niche - for when you're on a biking holiday or just need to cram a lot of stuff in a small car for an event. Cannondale's Airport Carry On floor pump is just such a pump, with a capacity equal to many a full-sized track pump and a clever folding design to make it more packable.

Read our review of the Cannondale Airport
Find a Cannondale dealer

Lezyne Alloy Floor Drive track pump — £59.99

Lezyne Alloy Floor Drive

Thanks to its clever Flip-Thread chuck the Lezyne Alloy Floor Drive works with every type of valve and valve extender we've tried and without any of that fuss of wiggling the connector or refitting to get it started. Quite frankly it's a brilliant bike pump.

The Lezyne Alloy Floor Drive is robust and well built with the barrel and base being CNC machined from aluminium. With the base measuring 220mm in width it's stable in use thanks especially to the large diameter pressure gauge bezel creating a kind of tripod effect.

Find a Lezyne dealer
Read our review of the Lezyne Alloy Floor Drive pump

SKS Rennkompressor floor pump — £45.33

SKS Rennkompressor

There's nothing terribly fancy about the Rennkompressor, though the latest version has a choice of chucks. What sets it apart, and makes it a very common shop choice of bike pump, is the durability that comes from its beefy cast aluminium base, fold-out steel feet, steel barrel and wooden handle. If you want a track pump you can leave in your will, this is the one to buy.

Find an SKS dealer

Topeak Joe Blow Sport III —  £27.14

Topeak Joe Blow Sport II

You don't have to spend the thick end of fifty quid to get a decent floor pump. Topeak's Joe Blow Sport III is deservedly popular for its sturdy construction, double-sided chuck and comfy elastomer-covered handle.

Topeak has put the gauge halfway up the barrel so it's easy to see but not so high that a trivial topple will smash it. Good thinking.

Read our review of the Joe Blow Sport III
Find a Topeak dealer

Gauges

If you're really fanatical about air pressure, then a standalone gauge can help make sure you get your tyres to the right pressure every time.

SKS Airchecker II — £16.29

SKS Airchecker digital tyre pressure gauge

If you've got a track pump, and you're meticulous about your tyre pressures, a standalone pressure gauge is a good investment, giving greater precision and consistency than the typical gauge that's built in to a pump.

The SKS Airchecker is a well-made digital gauge for tyre pressures that's quick to use once you have the knack of getting it firmly seated on the valve. SKS is well known for its mudguards. The Airchecker is a solid digital pressure gauge that comes with the same rugged build quality and carries a five-year warranty.

Operation is mostly self-evident: press the On/BAR/PSI button to wake the gadget up and toggle between scales. The Mode button allows you to change from the default 'snapshot' pressure reading to a real-time gauge that you'll need when you want to let some air out. That's achieved by pressing the little orange 'deflate' button on the valve head.

Read our review of the SKS Airchecker

Topeak SmartGauge D2 — ~£20.00

2020 Topeak Smarthead Gauge D2 - 2.jpg

The Topeak SmartGauge D2 is a well-designed, tough, user-friendly and compact digital pressure gauge. It fits both Presta and Schrader valves, gives live readings of changing pressures and will last months, if not years, on a single battery. There's little not to like – it's the perfect antidote to analogue track pump readings that are often inaccurate and hard to see.

Read our review of the Topeak SmartGauge D2
Find a Topeak dealer

Tubeless tanks

If you've already got a track pump you might not want to buy another one with the capability to burst-inflate tubeless tyres. A tubeless tank is the alternative, providing a high-pressure reservoir that can be dumped into your tubeless tyre in one hit to pop the bead on to the rim.

Topeak Tubibooster X tubeless inflator —~£57

Topeak-Tubibooster-X-tubeless-inflator-review-100

Topeak's Tubibooster X makes short work of inflating and seating tubeless tyres, with a tough, high-pressure aluminium body that's charged using a separate track pump. It's easy to use, with quality connectors and it's a great addition to your workshop if you don't have a combined pump/inflator already.

Read our review of the Topeak Tubibooster X
Find a Topeak dealer

Mini pumps

A scaled down version of a frame pump, a mini-pump is small enough to fit in a bag or pocket, or clips into a mount that fits under a bottle cage. Mini-pumps are popular because they're light and tidy. They don't get a tyre up to pressure very quickly, but their fans see this as worth putting up with given how rarely they need them.

Mini bike pumps vary widely in how well they work. Some just won't get your tyres up to recommended pressure, so you'll have to ride carefully after using one to avoid a pinch flat, but there are a few gems out there that work almost as well as frame pumps.

Topeak RaceRocket HP — £24

Topeak Racerocket HP.jpg

The Topeak RaceRocket HP disappears inside a standard jersey pocket yet inflates a tyre with less effort than you might expect given its size. It looks good and functions well, and Topeak's SmartHead makes it compatible with both Presta and Schrader valves.

At only 18cm the RaceRocket HP is, as I said, perfect for stashing in a jersey pocket – though it does also come with a frame bracket – but despite its small size it pumps effectively, inflating a tyre to 90 or 100psi with less pain than is often associated with mini pumps, thanks to a reasonable chamber capacity and a comfortable and tactile design.

Read our review of the Topeak RaceRocket HP
Find a Topeak dealer

Birzman Mini Apogee hand pump — £22.99

Birzman Mini Apogee Hand Pump.jpg

The Birzman Mini Apogee Hand Pump is really small, light and nicely made, with a crackingly good head. Made to Birzman's usual high standards, it's a tidy bit of kit.

At 136mm long it's shorter than your average-sized modern mobile phone, and at 79g about half the weight. So physically it disappears into even the tightest or shortest jersey or shorts pocket alongside your other kit. Depending on design, it's pretty likely it'll fit into your saddlebag or pocket tool pouch too.

Inflating a 23mm 700C tyre took 200 easy strokes to get to a get-me-home useable 63psi.

Read our review of the Birzman Mini Apogee
Find a Birzman dealer

Topeak Pocket Rocket mini pump — £13.52

Topeak Pocket Rocket.jpg

The Topeak Pocket Rocket weighs in at a measly 109g and is a smidge over 22cm long, meaning it can easily nestle down in a jersey pocket without falling out. Despite its small size it works really well, pumping up a 28mm tyre in around 150 strokes. It's well made too, and looks a much more expensive pump than it is.

Read our review of the Topeak Pocket Rocket
Find a Topeak dealer

Lezyne Road Drive L Alloy — £40.00

Lezyne Road Drive Large

At 297mm, the L-for-Long version of this mini-pump isn't terribly mini, but it works well. It comes with its own bracket and it's very shiny and beautifully made with some well thought out little details. Both ends of the CNC-ed aluminium bike pump are protected by rubber caps to stop road gunk getting inside and the connecting hose screws securely inside the handle.

For pocket-stowage, try the 216mm-long M version

Read our review of the Lezyne Road Drive Alloy
Find a Lezyne dealer

Frame pumps

Your classic frame pump is intended to fit along the seat tube, between the top tube and down tube. Problem is, almost all bikes have two water bottles these days and one of them is on the seat tube. That means you may need to get imaginative to carry a bike pump on your frame, fitting it along the top tube, perhaps with the help of straps or a clamp-on pump peg.

The length of a frame pump means it's a fairly quick way to inflate a tyre out on the road, and it doesn't cost you the price of a carbon dioxide cartridge every time. Some riders feel a frame pump spoils the look of their bikes though.

Frame pumps usually come set up for Presta valves, but can be switched to Schrader by swapping round some parts in the chuck.

Topeak Road Master Blaster — £16.99

Topeak Road Master Blaster frame pump

Topeak's Road Master Blaster is a well-thought-out bike pump that's a reliable companion for longer excursions. Well built and capable of high pressures, it's a great touring or Audax pump.

The Aluminium-barrelled, plastic-ended Master Blaster has a sprung handle and comes with a strap to keep it snugly attached to your bike; there's four sizes to fit pretty much any frame. Once removed you can lock the handle and pump either Presta or Schraeder tubes (via interchangeable internals) to a claimed 160psi. As usual this is a wildly optimistic maximum, but I stuffed 100psi into a 700x23c tyre in just over 100 strokes without any problems at all.

Read our review of the Topeak Road Master Blaster
Find a Topeak dealer

Zefal HPX Classic frame pump — £20

zefal-hpx-vintage-frame-pump

Legendary US bike shop Rivendell Cycles calls the HPX "the biggest commercial mainstream normal zero-snobbeury bicycle success that has ever come out of France" and we can't argue with that. The narrow barrel makes high pressures easy, the thumblock grabs the valve firmly and the switchable sprung handle means no wasted effort.

The design's been around since the early 1970s. HPXes are tough and durable enough that we wouldn't be surprised if there are still a few of the first batch in use.

Find a Zefal dealer

Carbon dioxide inflators

With the work done by a small bottle of compressed gas, carbon dioxide (CO2) inflators are the fastest way of getting back on the road. They're perfect for sportives or fast training rides where you don't want to be holding up the rest of the group by labouring with a bike pump.

As a gas expands it cools, so look out for CO2 inflators that protect your fingers from the canister, either with a rubber cover for the canister or by enclosing it in a plastic shell.

Some inflators only pop open the canister when you use it, and don't allow you to use only part of the available gas, others have a trigger so you can use just part of the contents.

A 16g cartridge will get a 23mm tyre up to 90-100psi, which should be plenty to get you home. Threaded cartridges are usually slightly more expensive than unthreaded. Buy in bulk if you're relying on CO2 as your main way of fixing flats on the road.

Bontrager Air Rush Road CO2 Pump — £25.00

Bontrager Air Rush Road CO2 Pump.jpg

The Bontrager Air Rush Road CO2 Pump is a nifty little dual design that won't leave you deflated on the roadside.

The problem with a mini bike pump is that they are slow, and also an unnecessary upper-body workout for the weedy cyclist. The problem with CO2 canisters is that they are a one hit wonder. Combine the two and you might just have the ultimate solution.

Read our review of the Bontrager Air Rush
​Find a Bontrager dealer

Genuine Innovations Ultraflate 20g CO2 Inflator — £16.00

Genuine Innovations Ultraflate CO2 Inflator.jpg

The Genuine Innovations Ultraflate CO2 inflator is a super-useful bit of kit, albeit a shade heavier than, say, carrying a cartridge and a head unit. It uses threaded and non-threaded canisters up to 20g and threaded 25g cartridges and works on both Schrader and Presta valves.

The trigger means you can ease the delivery rather than dump a big load of gas as with some simpler heads, which can cause a popped tube with the sudden pressure. The holder keeps your hands safe from the sudden thermal change in the canister, which literally freezes as the gas is discharged, and the plastic sections of the head and trigger keep your fingers away too.

Read our review of the Genuine Innovations Ultraflate
Find a Genuine Innovations dealer

Lezyne Control Drive CO2 Inflator — £25

Lezyne Control Drive CO2 Inflator

Lezyne's Control Drive CO2 Inflator makes it really easy to get any Presta or Schrader inner tube fully inflated. It provides easy control of the flow of gas and has a jacket to protect your hands from freezing to the canister during use.

The Control Drive is as simple as they come, is very nicely designed and works effectively. The dual head screws onto any standard threaded CO2 canister and provides Presta and Schrader compatibility. You simply push the Control Drive onto the valve, and turn the inflator head to release air.

Read our review of the Lezyne Control Drive
Find a Lezyne dealer

Birzman Infinite Apogee Road with CO2 Mini Pump — ~£32

Birzman Infinite Road and CO2 pump

The Birzman Infinite Road + CO2 pump is a 2-in-1 pump and C02 inflator that's a good-looking efficient machine to get you back on the road in the minimum of time. You can either inflate your tyres manually, use a CO2 cartridge or if you're determined to get to 120psi, start with the hand-pump and top off with CO2.

Read our review of the Birzman Infinite
Find a Birzman dealer

B’Twin CO2 Pump and Cartridge — £12.99

BTwin CO2 Inflator and 16g Cartridge.jpg

The B'Twin CO2 Inflator & Cartridge Set is probably the best-value inflator on the market. At £13, fitting 16 or 25g canisters with precisely-controllable one-handed inflation, it's a great buy.

With the head threaded most of the way onto the cartridge it's 12cm long, and easily slips into a pocket. Removed from the cartridge it's as small as these things get, so easily put into a tool roll.

It's hard to imagine a simpler process: screw on the canister fully, press onto valve, done. Pressing down on the valve will push it through the rim if you've removed the lockring from your valve stem, or are running unthreaded valves. Either way, applying pressure opposite onto the tyre to keep the valve in place is dead easy, and as the tube starts to inflate, the valve very quickly resumes its natural position and pushes back against the inflator head.

Read our review of the B’Twin CO2 Inflator and 16g Cartridge
Find a B’Twin dealer

Explore the complete archive of reviews of pumps and inflators on road.cc

About road.cc Buyer's Guides

The aim of road.cc buyer's guides is to give you the most, authoritative, objective and up-to-date buying advice. We continuously update and republish our guides, checking prices, availability and looking for the best deals.

Our guides include links to websites where you can buy the featured products. Like most sites we make a small amount of money if you buy something after clicking on one of those links. We want you to be happy with what you buy, so we only include a product in a if we think it's one of the best of its kind.

As far as possible that means recommending equipment that we have actually reviewed, but we also include products that are popular, highly-regarded benchmarks in their categories.

Here's some more information on how road.cc makes money.

You can also find further guides on our sister sites off.road.cc and ebiketips.

Road.cc buyer's guides are maintained and updated by John Stevenson. Email John with comments, corrections or queries.

Acknowledged by the Telegraph as a leading cycling journalist, John Stevenson has been writing about bikes and cycling for over 30 years since discovering that people were mug enough to pay him for it rather than expecting him to do an honest day's work.

He was heavily involved in the mountain bike boom of the late 1980s as a racer, team manager and race promoter, and that led to writing for Mountain Biking UK magazine shortly after its inception. He got the gig by phoning up the editor and telling him the magazine was rubbish and he could do better. Rather than telling him to get lost, MBUK editor Tym Manley called John’s bluff and the rest is history.

Since then he has worked on MTB Pro magazine and was editor of Maximum Mountain Bike and Australian Mountain Bike magazines, before switching to the web in 2000 to work for CyclingNews.com. Along with road.cc editor Tony Farelly, John was on the launch team for BikeRadar.com and subsequently became editor in chief of Future Publishing’s group of cycling magazines and websites, including Cycling Plus, MBUK, What Mountain Bike and Procycling.

John has also written for Cyclist magazine, edited the BikeMagic website and was founding editor of TotalWomensCycling.com before handing over to someone far more representative of the site's main audience.

He joined road.cc in 2013 and these days he lives in Cambridge where the lack of hills is more than made up for by the headwinds.

Latest Comments