Support road.cc

Like this site? Help us to make it better.

feature

All the gear? Check out the gearing choices of the pros at the Tour de France

What size cogs does it take to be successful in the Tour de France? We take a closer look at the gearing choices of the pros

Gearing choice in the Tour used to be easy, a standard chainset was the only way to go and cassette choices were limited at best. However, these days, with 12-speed options from Shimano, SRAM and Campagnolo all represented in the peloton, there's more choice than ever. We've had a nosey at the pros' bikes to see what they're using this year.

> ​Suffering on the hills? Find out how to get lower gears to make climbing easier

2023 Dauphine UAE Colnago V4Rs Yates chainset 54-40 - 1.jpeg

The peloton's gearing choices differ from many consumer bikes simply because the riders race at very high speeds and therefore need bigger gears to keep a comfortable cadence. Whereas most bikes you can buy come specced with 50/34t compact or 52/36t chainset, (or 48/35t and 46/33t on SRAM 12-speed groupsets paired with 10-tooth start cassettes) you'll typically find the peloton powering along on chainsets with larger chainrings.

Check out this article for a primer on the basics of gears and all the lingo

2023 Dauphine Jayco Groenewegen chainset 54-40 - 1.jpeg

The most common chainset size in the pro peloton on normal stages is 54/40t. That's a standard Shimano Dura-Ace option, and most teams racing in the Tour de France use this groupset. This is the chainset from Dylan Groenewegen's Giant Propel (above), for example.

2023 Dauphine Boasson Hagen 55-42 11-speed chainset - 1.jpeg

There are plenty of other choices, though. We spotted Edvald Boasson Hagen of Team TotalEnergies using this 55/42t chainset (above) which comes from the days when Shimano Dura-Ace was an 11-speed system.

2023 Dauphine Enric Mas 52-39T SRAM - 1.jpeg

Enric Mas, who had to withdraw from this year's Tour after sustaining an injury during the first stage, was using a 52/39t SRAM chainset (above).

2023 Dauphine Georg Zimmermann Cube Litening Aero 55-42T Rotor chainset- 1.jpeg

Intermarché - Circus - Wanty's Georg Zimmermann uses this 55/42T Rotor setup on his Cube Litening Aero.

2023 Dauphine Shimano neutral service 52-36T - 1.jpeg

The Shimano neutral service bikes are fitted with 52/36T chainsets that give a broad spread of gear options for any rider who is unfortunate enough to require one.

2023 Dauphine Jayco Luke Durbridge TT chainset 58-46 - 1.jpeg

You'll find larger chainrings during the time-trial stages when riders are consistently moving at high speeds. For example, this (above) is Luke Durbridge's TT bike with 58/46t chainrings fitted.

Stefan Bissegger TdF 64T chain ring

During last year's Tour de France, Stefan Bissegger was spotted using this 64 tooth chainring that is not available to the public.

Cassettes have varied much more over the years, largely as a consequence of the steady increase in gears, from the old days of 5-speed and 6-speed to the 12-speed setups that are currently used in the pro peloton.

As the number of gears has increased, so too has the range, with larger cassettes increasingly common, partly as a response to race routes that are getting ever harder as race organisers attempt to find even more cruelly savage mountains to send racers up.

2023 Dauphine Astana drivetrain - 1

The increase in the number of gears also means that riders can cover those larger ranges with smaller jumps between sprocket sizes. This helps them keep a more even cadence as they move across the cassette.

When we visited the Critérium du Dauphiné recently, loads of pro bikes were fiitted with 11-30t and 11-32t cassettes. These are positively humongous compared with a few decades ago when you'd get an 11-21t cassette and, if you were lucky, 11-23t for the mountains. 

2023 Dauphine Gaudu Lapierre - 1

We saw quite a lot of 11-34t cassettes too, and that surprised us. David Gaudu's Lapierre Xelius SL (above), for example, was fitted with a 54/40t chainset and an 11-34t cassette. With a 40t inner chainring now more common than a 39t, it looks like more riders want a larger cassette to compensate on hillier roads.  

Campagnolo has just updated its Super Record EPS groupset and now the cassettes come with a 10t smallest sprocket. The standard options are 10-25t, 10-27t and 10-29t.

> Campagnolo ditches iconic thumb shifter and goes wireless with new Super Record Wireless electronic groupset... and it'll cost you £4.5k

The largest sprockets on those cassettes might seem pretty small but at the same time Campagnolo has altered the size of its chainsets to compensate. They're available in 50/34t, 48/32t and 45x29t options.

2023 Dauphine Ben O'Connor Campagnolo 54-39 - 1.jpeg

That said, we saw Ben O'Connor's BMC Teammachine (above) at the Dauphine fitted with new Campagnolo Super Record EPS shifters and derailleurs, with a 54/39t chainset and a larger cassette than any of those listed above.

2023 Dauphine Vingegaard cassette - 1.jpeg

SRAM offers a 10-33t cassette for Red eTap AXS, and that's what we saw fitted to one of Jonas Vingegaard's bikes ahead of the Dauphiné, matched to a 52/39t chainset. 

Which chainset is right for you?

Movistar 2022 Canyon Aeroad CFR chainrings

The use of that 10t sprocket means that SRAM chainsets don't need to be as large as Shimano's to achieve the same gear ratios (Shimano's smallest cog is 11t). However, as well as the 52/39t chainset Vingegaard was using, SRAM now offers 54/41t and 56/43t options.

What about 1x?

SRAM’s 1x system, where you have a chainset with a single chainring matched to a wide-ranging cassette, has been around for a few years now and has gained more prominence lately thanks to its use by Jumbo Visma riders Jonas Vingegaard and Wout van Aert in this year’s Tour de France.2023 Tour de France Stage 1 Vingegaared © Zac WiLLIAMS SWpix.com (t-a Photography Hub Ltd) - 1 (1)

Pic: © Zac WiLLIAMS SWpix.com (t-a Photography Hub Ltd)

Jumbo-Visma switched from Shimano to SRAM for this season and we first saw Vingegaard experimenting with 1x at the Dauphiné.

> Jonas Vingegaard uses 1x gearing for Tour de France opening stages

A few riders have dabbled with 1x, with varying levels of success, and of course, there was the ill-fated Aqua Sport Blue team which solely used 1x drivetrains on 3T Strada bikes. The team boss at the time was quite scathing about either the drivetrain or the bike, or perhaps both. 

There are benefits to a 1x system. There’s no duplication of gears – which is something you get with 2x groupsets – it can be lighter and more aerodynamic, and the lack of a front derailleur means there's one less component to fail.

2023 Dauphine Jumbo-Visma TT bike 1x - 1.jpeg

Jumbo-Visma uses single chainring setups on its time trial bikes (above) when it doesn't need a huge spread of gears. 

However, Vingegaard and Van Aert have also used 1x for normal road stages with a Wolf Tooth LoneWolf Aero chainguide fitted to help keep the chain in place. 

It's not as if Jumbo-Visma has chosen to give 1x a go just for flat courses; the first two stages of this year's Tour were pretty hilly. It'll be interesting to see if the team sticks with the tech throughout the race and, if not, the circumstances in which it turns to 1x.

SRAM insists that Jumbo-Visma's use of 1x isn't a marketing exercise, by the way. It's down to the team and the individual riders which of SRAM's components they decide to use.

2023 Cervelo Dauphine 1x Jonas Vingegaard - 3 (1).jpeg

One issue with 1x is that you can still get some fairly sizeable jumps between the gears. A possible solution to this is the Classified system which basically moves the function of the front mech into the rear hub.

2023 R+1+Classified_Cassette_1

Classified's tech could also bring aero benefits and it has been used by a few teams. Uno X has tried it out in competition, for example, and Lotto-Dstny's Victor Campenaerts rode this year's Omloop Het Nieuwsblad with a Classified system on his bike.

The system raises some questions about wheel changes but could it be something we see in the Tour de France in the future?

> Check out Classified's innovative Powershift drivetrain

What about the rest of us?

Today’s pro road racers are provided with equipment vastly superior to 10-20 years ago, but it’s the range of gears that has been the most interesting trend as the groupsets have evolved. As the number of sprockets has increased, the gear range has increased. Are riders getting soft, are courses getting harder, or is the higher number of gears making it possible?

Bahrain-Victorious Merida Scultura Caruso -8

The three big groupset manufacturers are still focused on the needs of the pro racers and delivering groupsets to meet their needs, and then selling them to the public, but there just aren’t many normal people that need a 54-11 gear. The requirements of the pros are very different to people like you and me. 

This is slowly changing though. Outside of the pro peloton, we're starting to see a shift in focus from the equipent manufacturers to meet the growing diversity of modern cyclists that are less influenced by pro racers and more by their riding, whether long-distance road rides or adventure and gravel bikepacking.

Largely thanks to adventure riding, we're now seeing much wider range groupsets with more realistically usable gear ratios for the many people that don't go racing every Sunday, but want gears to help them out on challenging terrain and let them conquer every hill.

Jamie has been riding bikes since a tender age but really caught the bug for racing and reviewing whilst studying towards a master's in Mechanical engineering at Swansea University. Having graduated, he decided he really quite liked working with bikes and is now a full-time addition to the road.cc team. When not writing about tech news or working on the Youtube channel, you can still find him racing local crits trying to cling on to his cat 2 licence...and missing every break going...

Add new comment

25 comments

Avatar
Cugel | 8 months ago
2 likes

No one other than a professional racing cyclist or an amateur of the very highest level needs an 11 tooth or even a 12 tooth sprocket, unless their big chainring is a 44 rather than a 50 or 52.

People tell themselves that they do because they want to pedal really fast down hill. But it's likely that their pedalling at the low wattages of ordinary cyclists merely increases their drag from the air, downhill; so they go slower than they would if they stopped pedalling, tucked in their knees to the frame and crouched in an elbows-in aero position.

As to the idea that a double or triple chainring giving duplicated gear ratios is somehow a disadvantage .... this too is an unthinking analysis.

The point of a double or triple chainring is to provide, from the same cassette, two or three gear ranges that are close enough to enable the rider to find the ideal cadence, whether for generally slowish ascents, mid-speed undulations or flats agin' the wind, or fast riding when the road is smooth & flat with the wind behind. It isn't to provide more gears but rather to provide better gear ranges for different terrains/speed ranges.

*******

But our culture encourages sales of high end racey bike parts by seeming to promise the buyer of high-geared stuff that they too can be just as fast as them riders in the TdF by having a Dura-Ace 53/39 chainset and an 11-25 cassette. This is just a-one o' them daft "dreams" they install in the heads of folk far too blase about having their wallets emptied whilst paying no attention to the reality of their actual cycling abilities.

The annoying part for those wanting more realistic gears is that it's often very hard to find them. Because road bike frames tend to come with front braze-on fitting to suit chainrings from 48 - 56, rather than 44 - 50, you'r stuck with a 48 or (more probably) the 50 that the bike comes with. But can you buy a 14-34 cassette? Not really - you have to buy an 11- 34 cassette plus three Shimano cogs of 14, 15and 16 (to replace the 11, 13 & 15). This becomes expensive - and difficult to do as only SJS cycles seems to sell spare Shimano sprockets in Blighty, these days. 

********

My own preferred and favourite gear range is a 50/39/30 chainset with a 15 - 36 cassette of 10 cogs. It goes as fast as I can go pedalling (without a significant downhill) in 50/15 (30 mph, briefly) but also allows a twiddle in a very low gear. Each chainring provides relatively close-ratio gears from the cassette, since there's only usable cogs and no wasted 11, 12, 13 or 14 that would never get used.

Avatar
Rendel Harris replied to Cugel | 8 months ago
4 likes

I'm a very ordinary (and I mean very very very ordinary) 54-year-old cyclist and I use my 50/12 as my standard flat no wind gear to ride at around 23mph, on the bike that has a 52/11 I can certainly get a higher speed downhill than just tucking in until the speed starts to approach 50mph. Pardon me saying so but you seem to be rather solipsistic in your belief that what suits you is what should suit anybody and that anyone who disagrees is just a mug falling for marketing hype. We are all different, you know.

Avatar
Cugel replied to Rendel Harris | 8 months ago
2 likes

Rendel Harris wrote:

I'm a very ordinary (and I mean very very very ordinary) 54-year-old cyclist and I use my 50/12 as my standard flat no wind gear to ride at around 23mph, on the bike that has a 52/11 I can certainly get a higher speed downhill than just tucking in until the speed starts to approach 50mph. Pardon me saying so but you seem to be rather solipsistic in your belief that what suits you is what should suit anybody and that anyone who disagrees is just a mug falling for marketing hype. We are all different, you know.

At 23 mph in 50/12 you'll be revving at mid-60s rpm. That's a hard way to pedal unless you're a body builder. 

At 120rpm in 50/11, you'd only be doing 44mph, so you must have very whizzable legs to get to 50mph whilst pedaling!

Perhaps you need to practice tucking in a bit if you can't increase speed quite dramatically by getting more aero? To increase downhill speed above around 30mph just by pedalling harder, you'd have to be inputting a rather large number of watts - certainly more than those of "a very very ordinary" cyclist.

You can call hard facts about gearing, aero positions and so forth "solipsistic" but facts are uncaring of our mere opinions, seeing as how they're quite hard to avoid or change.

Avatar
Rendel Harris replied to Cugel | 8 months ago
0 likes

Cugel wrote:

At 23 mph in 50/12 you'll be revving at mid-60s rpm. That's a hard way to pedal unless you're a body builder.

As a result of a lot of leg weight work as a rugby player I do have rather large pins - think Chris Hoy rather than Froome, though without an ounce of the talent of either - and I find 65-70 a comfortable cadence at that speed. Which just goes to prove what I said, we're all different and it's nonsense to issue blanket statements like "No one other than a professional racing cyclist or an amateur of the very highest level needs an 11 tooth or even a 12 tooth sprocket."

Cugel wrote:

At 120rpm in 50/11, you'd only be doing 44mph, so you must have very whizzable legs to get to 50mph whilst pedaling!

If you look again I said that was on the bike with 52/11 and I get close to 130rpm before spinning out on a downhill, which I don't think is terribly unusual or "whizzable".

Cugel wrote:

facts are uncaring of our mere opinions

That is very true, but most of what you wrote was opinion based on what you think is an ideal way to ride.

 

Avatar
Cugel replied to Rendel Harris | 8 months ago
0 likes

Rendel Harris wrote:

Cugel wrote:

At 23 mph in 50/12 you'll be revving at mid-60s rpm. That's a hard way to pedal unless you're a body builder.

As a result of a lot of leg weight work as a rugby player I do have rather large pins - think Chris Hoy rather than Froome, though without an ounce of the talent of either - and I find 65-70 a comfortable cadence at that speed. Which just goes to prove what I said, we're all different and it's nonsense to issue blanket statements like "No one other than a professional racing cyclist or an amateur of the very highest level needs an 11 tooth or even a 12 tooth sprocket."

Cugel wrote:

At 120rpm in 50/11, you'd only be doing 44mph, so you must have very whizzable legs to get to 50mph whilst pedaling!

If you look again I said that was on the bike with 52/11 and I get close to 130rpm before spinning out on a downhill, which I don't think is terribly unusual or "whizzable".

Cugel wrote:

facts are uncaring of our mere opinions

That is very true, but most of what you wrote was opinion based on what you think is an ideal way to ride.

Fact-based based on my experience, that of many others and that forced on anyone who employs various gear ratios and positions on a bike, I think you'll find.

But a mental experiment is also available. Consider the gearing of professional cyclists able to output 400 watts continuously then work out what gearing might, scaled, be appropriate for everyday cyclists with power output capbilities more between 100 and 200 watts.

Will the latter somehow be able to emulate the 400 watters just by having the same gear ratios? Some think so, going by their claims. This is not so much "just a different opinion" as "magical thinking".

Avatar
Cugel replied to Rendel Harris | 8 months ago
1 like

Rendel Harris wrote:

Cugel wrote:

facts are uncaring of our mere opinions

That is very true, but most of what you wrote was opinion based on what you think is an ideal way to ride.

How would you have managed, all those years when the highest gear one could buy for a bike was 52 X 13? Did it ruin your cycling?   1

Let's face it, the reason why most go about with cassettes starting with 11 teeth (soon to be 10 or even 9!) is that its very, very difficult to buy anything else. And nearly every road, gravel, touring or audax bike sold as such comes with such a cassette.

You can buy a 14-28 cassette from Mr Shimano. But no 14 - 34 cassette - you have to make your own franken-cassette from a 14-28 plus an 11-34; or buy individual alternative cogs. This is costly.

In short, the reason most have 11- summick cassettes is because of marketing, driven by the fashions of professional racing (also determined by marketing). "Reasons" given by ordinary cyclists to justify their 11 toofers seem, to me, to be "rationalisations after the fact" (of being caught by a fashion-net).

It reminds me of the highly successful marketing trick concerning cycling helmets - no decent proof they achieve anything but a lot of profits for manufacturers (not to mention the polluting landfill) and increased "accidents" due to risk compensation thinking .... but millions buy, wear and defend them.

Avatar
mark1a replied to Cugel | 8 months ago
1 like

I knew it wouldn't be long before we got back on to those dark forces of the global commerce conspiracy and their evil plan to reprogram the worker drones with their "marketing".

Avatar
Rendel Harris replied to Cugel | 8 months ago
2 likes

This is simply drivel and your determination to say that anyone who disagrees with your opinion as to the correct gear ratio is falling for a marketing ploy is risible. What is the marketing advantage to Shimano of selling 11 toothed smallest ring cassettes? Do you think they are making a few bob on the micrograms of metal saved? 

If you want a 14-34 11sp cassette, buy a Miche Primato and stop telling everybody else that they are wrong and falling for a sucker punch by The Man just because they prefer a different gear ratio to you.

Avatar
HoldingOn replied to Cugel | 8 months ago
1 like

I commute with 11-34 and 50/34 and usually average about 75rpm. My speed averages out about 25kph (according to Garmin)
I moved to that setup because it was the cheapest option that I knew would fit on my bike.
It is commuting, so I do the same route every day and don't move out of the 50. I am able to drop to the 11 when the headwind isn't too strong, but usually I don't get down there.
My cadence tops out about 105 on some of the uphill sections.
I am in exercise clothing, arrive sweaty and very much treat it as my daily exercise routine.
I am not a pro.

Avatar
CumbrianDynamo replied to Cugel | 8 months ago
2 likes

I commute on 52/36 chainrings with an 11-28t cassette and I'm usually in the 52/11 on the flat if the road is clear. And I'm just a 48-year old hobby cyclist.

Avatar
Cugel replied to CumbrianDynamo | 8 months ago
1 like

CumbrianDynamo wrote:

I commute on 52/36 chainrings with an 11-28t cassette and I'm usually in the 52/11 on the flat if the road is clear. And I'm just a 48-year old hobby cyclist.

What speed are you doing and, as a result, what's your cadence, in that gear?

When I were a lad, 382 years ago, even professionals like that Merckx, had 52 X 13 as their top gear. They still managed to race at speeds not that much slower than today's professionals. 

When I raced, often in races on the flat that averaged 27mph+, I managed to do so on a 52X14 or even 15 top gear. This didn't win me any sprints but it got me to the finish only a few seconds behind those who did sprint to victory.

Of course, I don't mind if you want to go about in 52 X 11 at 55rpm cadence but when it means I can't buy the cassette I want because all the fellows with "all the gear" only want to have the same gears as the bloke wot won Le Tour, it gets a bit tedious.

Avatar
CumbrianDynamo replied to Cugel | 8 months ago
2 likes

About 45km/h, cadence about 80. Is that acceptable to you?

Avatar
Dnnnnnn replied to CumbrianDynamo | 8 months ago
0 likes

CumbrianDynamo wrote:

About 45km/h, cadence about 80. Is that acceptable to you?

Your flat road commuting pace equates to about 21m30s minutes for a 10 mile TT. That's pretty fast (particularly as I don't suppose you commute on tri-bars, TT wheels, etc.) 

Avatar
CumbrianDynamo replied to Dnnnnnn | 8 months ago
0 likes

As I'm commuting it's not a speed I sustain for particularly long distance thanks to the hazards you might expect on a city rush hour journey, but I need the 11 when I have enough clear and flat bus lane to be able to get to around 30mph. Wouldn't know about riding TT as I've never done one, but on a good commuting day on my sub-8kg carbon bike it'll take me about 30 mins to travel about 9 miles in London traffic with a couple of hundred metres of ascent. 

Avatar
Dnnnnnn replied to Cugel | 8 months ago
3 likes

www.bikecalc.com/gear_speed may be of interest here.

80rpm in 52/11 is almost 50kph.

Recent hour record breaking bikes had around the equivalent of a 52x11 gear, pedalled at about 100rpm. I guess MAMILs are more likely to be in the 80-90rpm range - much less over any distance doesn't seem very efficient.

Avatar
Cugel replied to Dnnnnnn | 8 months ago
0 likes

Dnnnnnn wrote:

www.bikecalc.com/gear_speed may be of interest here.

The bike calc is indeed very revealing when it comes to an examination of many of the anecdotal gearing and speed claims of many internet forum posters on these matters. I nivver realised how many potential TdeF riders there were just going about from A to B or content with the Sunday club run!  1

Avatar
wycombewheeler replied to Cugel | 8 months ago
0 likes

Cugel wrote:

 

My own preferred and favourite gear range is a 50/39/30 chainset with a 15 - 36 cassette of 10 cogs. It goes as fast as I can go pedalling (without a significant downhill) in 50/15 (30 mph, briefly) but also allows a twiddle in a very low gear. Each chainring provides relatively close-ratio gears from the cassette, since there's only usable cogs and no wasted 11, 12, 13 or 14 that would never get used.

In my opinion, nce the gear ratio goes much below 1:1 then you can't pedal any mr beause the front wheel keeps lifting off the ground.

Avatar
Cugel replied to wycombewheeler | 8 months ago
1 like

wycombewheeler wrote:

Cugel wrote:

 

My own preferred and favourite gear range is a 50/39/30 chainset with a 15 - 36 cassette of 10 cogs. It goes as fast as I can go pedalling (without a significant downhill) in 50/15 (30 mph, briefly) but also allows a twiddle in a very low gear. Each chainring provides relatively close-ratio gears from the cassette, since there's only usable cogs and no wasted 11, 12, 13 or 14 that would never get used.

In my opinion, nce the gear ratio goes much below 1:1 then you can't pedal any mr beause the front wheel keeps lifting off the ground.

Is that a bald opinion (one with no experience-hair), a potted opinion from a cycling website or one based on your own experience?

My own experience is that gears below 1:1 are very good at enabling a pedal up those very long and steep ascents to be found in many locations across Blighterdom. This also seems to be the experience of tens of thousands of touring cyclists, over the years, including me on my many cross-Pennine trips with rear panniers but no front 'uns.

I've not yet seen a tourist or any other slow-twiddler o' the hills go tit-over-arse from the bike whilst twiddling up the steeps (and I've frequented many such steeps) despite their 24 ring and 34 cog.

You can get to a point where your road speed is so low that a bumpy bit might cause you to topple slowly sideways, mind.   1

Avatar
philsinclair replied to Cugel | 8 months ago
2 likes

Cugel wrote:

No one other than a professional racing cyclist or an amateur of the very highest level needs an 11 tooth or even a 12 tooth sprocket, unless their big chainring is a 44 rather than a 50 or 52.

Rather simplistic to state that. Try living in the alps and you will rapidly find the average cyclist with a 50/34T and 11/34 setup is now the most common. As a 50 is needed, so is the 11 to compensate for the lack of a bigger ring.

Avatar
Cugel replied to philsinclair | 8 months ago
3 likes

philsinclair wrote:

Cugel wrote:

No one other than a professional racing cyclist or an amateur of the very highest level needs an 11 tooth or even a 12 tooth sprocket, unless their big chainring is a 44 rather than a 50 or 52.

Rather simplistic to state that. Try living in the alps and you will rapidly find the average cyclist with a 50/34T and 11/34 setup is now the most common. As a 50 is needed, so is the 11 to compensate for the lack of a bigger ring.

The reason all those Alpine cyclists have 50/34 and 11/34 is that it's rather difficult to buy anything else with lower gears, in a road bike.

The touring cyclists I know, though - those who understand the need for lower gears up steep/long hills because of their loads - tend to buy from places like Spa, where chainsets of 44-34-24 are sold in significant numbers. A 44 ring with the ubiquitous 11 tooth sprocket is at least a usable gear at an efficient cadence.

But dear Rendel is wrong to think that I want to force all you 11-toofers to have only a 13 or 14 cog  Go about at 60rpm all you like!  I would just like to see alternative cassettes available for we fellows who know how to pedal properly.   1 (Take no notice of the "properly" - it's just a tease of you churners).

 

 

What missing bigger ring does the 11 tooth with a 50 ring compensate for?

Avatar
McVittees replied to Cugel | 8 months ago
2 likes

As a 50 year old 77kg 3.8w/kg rider, as far as I'm concerned my 11 & 12 tooth sprockets are effectively spacers that help with my chain line. I run 11-28 and 11-30 11 speed cassettes (with 50/34 or 36 front) but would happily give up the 11 tooth for tighter mid-gear ratios. 

Avatar
Tom_77 replied to McVittees | 8 months ago
0 likes

On my gravel bike I've got 46/30 at the front and 11-34t at the rear. I find this suits me very well cycling on the road. I can comfortably ride at any speed from walking pace up to 35 mph.

My cadence is usually around 90 though, if it was lower then I'd want a higher top gear.

Avatar
Patrick9-32 | 8 months ago
3 likes

Reminder that unless you are putting out 5.5 watts per kg you shouldn't be making gearing decisions based on what the pros are riding. 

Avatar
quiff replied to Patrick9-32 | 8 months ago
2 likes

To be fair, the article says that.

Avatar
Patrick9-32 replied to quiff | 8 months ago
0 likes

Indeed it does, hard to overstate though. You see so many ordinary people who wholeheartedly believe that they need gearing to pedal at 40mph and sacrifice an enjoyable ride to get it. 

Latest Comments