Support road.cc

Like this site? Help us to make it better.

feature

Disc brakes v rim brakes: which are more aero?

Culprit take their bikes to the San Diego Low Speed Wind Tunnel to find out

Disc brakes are probably the hottest topic of debate in the world of road bike technology right now, SRAM and TRP having recently revealed new designs with other major manufacturers being rumoured to be about to join them. Another big development in the road bike market over the past few years has been an increased concentration on aerodynamics. How do these two big developments relate to one another?

Culprit Bicycles have just been to the Low Speed Wind Tunnel (LSWT) in San Diego, California, to find out how a bike equipped with disc brakes performs against the same bike fitted with rim brakes. It’s a really interesting subject and one that, to our knowledge, hasn’t been tackled before. We might have suspected what the results would be, but we’ve not known for sure.

We’ll do something unusual for road.cc here and, rather than report on the findings, we’ll run Culprit’s paper in full. We’ll meet you again on the other side…

 

Culprit Bicycles Case Study: Disc brakes versus TRP TTV rim brakes

Culprit Bicycles recently set out to confirm the unknown answer to the question of whether disc brakes are more aero than rim brakes. Of course, frame design, cable routing, wheel selection, etc will have an effect on such drag results.

In order for a fair data comparison, Culprit Bicycles partnered with Trigon Bicycles with the use of their carbon CWT55 wheelset. Trigon offered a 20/24 aero bladed straight pull 55mm tubular wheelset with Tufo tires for use on the bikes running standard rim brakes.

For testing disc brake comparisons, Trigon offered the same CWT55 rim built on a six bolt disc hub with round J bend spokes, 24/24 spoke count. With the same rim profile, Culprit set out to give a similar data comparison

Road bike comparison: Culprit Croz Blade

Culprit ran their Croz Blade bike size 55 in the LSWT (Low Speed Wind Tunnel) In San Diego against itself, built with two different brake offerings. The Culprit Croz Blade was designed so the buyer can purchase one frame and build it two different ways in order to meet the demands of the time.

It is an aero road bike with 135 mm spacing for disc brakes and alloy inserts moving spacing back to 130mm spacing for rim brakes. The bike has a patented fork design that allows the use of both TRP TTV rim brakes [these are time trial linear pull brakes – Ed] behind the fork or disc brakes with internal routing on the same fork design.

For testing, the bike was run once as a disc road bike build using Ashima hydraulic disc brakes (the brakes were not working but Culprit chose to use a fully hydraulic brake caliper in testing as SRAM has already launched their newest Hydro system and Shimano is rumored to release later this year). The other was a TRP TTV rim build. The bikes were both built with Shimano Di2 Ultegra, 110mm carbon stems, 440mm carbon bars, and same post, saddle height, etc.

The objective of the test was to give the cycling community the drag data comparison between disc brakes and rim brakes. Keep in mind the use of aero road brakes, other manufacturers’ wheels etc. Those alternatives will affect the comparison drag numbers in contrast to standard rim brakes.

The test was conducted the same day with runs back to back to keep data as comparable as possible. The bike was run at a speed of 30mph with the wind also normalized at 30mph.  The bikes ran a full sweep of -20 degrees yaw (non-drive side) to +20 degrees yaw (drive side).

The results are shown below (strut tares not removed, estimated at around 100g of drag).

Culprit Legend triathlon bike run (disc brakes versus TRP TTV)

Culprit also ran the test with their new prototype Culprit Legend triathlon bike. Although this frame has modifications to be made before production, the main objective was to run the same bike through the tunnel with the same build with the only change being the use of TRP TTV rim brakes and hydraulic disc brakes.

In order to achieve the bike builds Culprit built the Legend bike with a SRAM Red triathlon groupset with RTC (Return to Center) shifters. The bike was built using Trigon’s new carbon aero bars, stem and seat post design and running a Prologo Nago Tri40 saddle. 

Culprit Bicycles partnered with Trigon Bicycles with the use of their carbon CWT55 wheelset. Trigon offered the 20/24 aero bladed straight pull 55mm tubular wheel set with Tufo tires for use on the bikes running standard rim brakes. For testing disc brake comparisons, Trigon offered the same CWT55 rim built on a six bolt disc hub with round J bend spokes, 24/24 spoke count. With the same rim profile, Culprit set out to give a similar data comparison.

Culprit ran a size 58 Legend. The bike is still in prototype stage and modifications to the design will affect final production and final drag numbers. The bike was run with the window in the frame (which testing showed extra drag so it will be removed in production). It was run with Ashima disc brake tri levers and brakes with 135mm spacing. It was then run a second time with TRP brake levers and TTV rim brakes at 130mm spacing. 

The objective of the test was to see how disc brakes performed on a triathlon bike. Due to improved cable routing design through the fork as well as the improved cable routing offered with a triathlon bike versus road bike (Croz Blade), the drag numbers were more similar in comparison of disc versus TTV.

The bike was also run from -20 degrees to 20 degrees of yaw with the wheels spinning at 30mph and the wind speed at 30mph.

[The drag of the bikes equipped with disc brakes are greater at every angle]

What can we learn from this case study?

On road bikes, the frame design will, of course, affect the drag results, but wind tunnel data cannot quantify the improved time and results that would come from the ability to brake with better power and modulation. The more confidence the rider has in all conditions, the later the rider can stop the bike, which leads the rider to have faster turns. Real world data will affect the time differences between disc and rim brakes greatly when put to the test in a riding/racing environment.

With tri bikes, the drag numbers were lower as the Legend has improved cable routing options over the Croz Blade. The greatest improvement [with the use of disc brakes] for triathletes will be confidence in stopping power for more technical courses. Disc brakes will affect the performance in all riding conditions, giving the rider confidence in their stopping power regardless of the weather conditions. 

The drag data represents that both road bikes and tri bikes have increased drag with the use of disc brakes with products currently available on the market. With the further development of disc brakes, frame/fork cable routing can improve, further reducing drag.

Brake manufacturers will be able to design more aerodynamic disc calipers and we will see studies done on just rotors, and see rotor design improvements. Rims and hubs will be modified and developed to meet the demands of a more aero option. Previously disc hubs were for cyclocross and mountain bikes and were therefore never designed with aerodynamics in mind. This change [the development of disc brakes for road bikes] will stimulate designers to come up with more aero hub designs while carbon and alloy rims can have the braking track removed, allowing for improved aerodynamics.

Culprit believes that in the future, disc brakes will be closer in drag to rim brakes, or even lower, with the improvements that will come in the areas listed above.

So, the question for many of you is:  “Are these differences exciting enough for you to jump onto the disc brake movement or would you rather wait until the pro peloton moves first?”

The Culprit Croz Blade is available now as either a rim brake build or disc brake build on the same frame. By the end of the year the Legend will also be available in two brake options on the same frame.

 

Back to road.cc

Okay, so that’s Culprit’s report in full. It’s interesting stuff. Here, in brief, are the main points that we’ve taken from it…

• The TRP TTV brakes produced less drag than the Ashima disc brakes – or, if you want to be more precise, the complete bike set ups using the TRP TTV brakes were more aerodynamically efficient.

• Culprit think - although this is nothing to do with the wind tunnel data - that a disc brake’s higher level of braking performance allows riders to slow later and corner faster than with rim brakes. They believe time saved in this way will reduce the aerodynamic deficit of disc brakes.

• Culprit believe that disc brakes can be designed to be more aerodynamically efficient than they are at present.

• Culprit also believe that manufacturers will be able to improve the aerodynamic efficiency of currently available disc brake hubs and rims.

For more info on Culprit bikes go to www.culpritbicycles.com

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

18 comments

Avatar
earth | 9 years ago
0 likes

I'm thinking the increase in drag would be less detrimental to road racing due to riders being in a peloton but would be fatal to timetrialists. Whereas the benefits of improved braking are more dependent on the course. TTs with less sharp corners are not going to see much benefit. Disc brakes for road racing perhaps, but not for TTs.

I'm not convinced of the argument that wheels will be lighter and more aero with discs. You will always have more spokes and nipples on a front wheel and I am not convinced the braking track adds significant weight to the rim. The clincher rim is inherently heavier but not due to the braking track. Tubular rim versions of wheels are lighter than equivalent clinchers but both have a braking track.

Avatar
kcr | 10 years ago
0 likes

The argument that riders will gain an advantage from the improved braking performance of discs is not very convincing. A good set of rim brakes are easily capable of braking to the limit of the road grip already, and in reality, few courses are so technical that braking performance becomes a critical factor.
I run disks on my road commuter because they are more practical for all weather commuting - the pads last longer, and there is no more grinding rims away in winter, and covering the bike in brake crud. For my race bikes, rim brakes work fine, so there doesn't appear to be an incentive to change at the moment, particularly given the apparent aero disadvantages.

Avatar
fukawitribe replied to kcr | 9 years ago
0 likes
kcr wrote:

The argument that riders will gain an advantage from the improved braking performance of discs is not very convincing. A good set of rim brakes are easily capable of braking to the limit of the road grip already,

It's not to do with outright power - for road I don't think it ever has been - it's the combination of number of things that lead to some preferring discs e.g. feel and feedback coupled with low braking effort, and consistent braking in adverse conditions.

kcr wrote:

and in reality, few courses are so technical that braking performance becomes a critical factor.

I think that's a very good point (for road racing).

Avatar
mattsccm | 10 years ago
0 likes

Surely nowadays weight isn't an issue. Bikes are easily built below UCI legal weights and I bet that even with discs that could be so. Do disc rims save any weight over rim brake weights if built for that?

Avatar
flobble | 10 years ago
0 likes

If I read this correctly, the rim wheels were built with aero bladed spokes, but the disk wheels were built with round spokes. Why on earth did they introduce an unnecessary difference between the wheels? Now we can't tell whether it was the spokes or the brake system that caused the drag difference. Duh!

Avatar
brakesmadly | 10 years ago
0 likes

This suggests that the type of route will influence which brakng system is more appropriate: faster straighter flatter routes will utilise the aero advantage of rim brakes but twisty ones with short steep downhills could reap the benefits of the braking improvements from discs.

In other words as is so often the case the answer is, "it depends".

Avatar
racingcondor | 10 years ago
0 likes

Pointless marketing led testing as the major benefits of committing to disc brakes will be that you can run lighter more aero rims because you're not confined by having the brake track. As a result no-one can produce good data yet because the rims don't exist.

Not to mention the disadvantage that discs weigh more (i.e. swings and roundabouts).

Much easier to test one small factor than actually try something real though...

About the only thing I will buy is that discs will have better wet weather braking although even that involves a tradeoff because you're narrowing the bracing angle of the spokes to fit it in making the wheel worse...

As you can see, I'm convinced  44

Avatar
STATO replied to racingcondor | 10 years ago
0 likes
racingcondor wrote:

About the only thing I will buy is that discs will have better wet weather braking although even that involves a tradeoff because you're narrowing the bracing angle of the spokes to fit it in making the wheel worse...

As you can see, I'm convinced  44

I always love that 'the wheels will be weaker' argument. You do realise people are riding 29er MTBs (same 622 rim dimension) on enduro and downhill courses these days? and you dont see many of those guys walking down hard bits fearing their wheels might fold over.

Avatar
Colin Peyresourde replied to STATO | 10 years ago
0 likes
STATO wrote:
racingcondor wrote:

About the only thing I will buy is that discs will have better wet weather braking although even that involves a tradeoff because you're narrowing the bracing angle of the spokes to fit it in making the wheel worse...

As you can see, I'm convinced  44

I always love that 'the wheels will be weaker' argument. You do realise people are riding 29er MTBs (same 622 rim dimension) on enduro and downhill courses these days? and you dont see many of those guys walking down hard bits fearing their wheels might fold over.

I posted a comment not long ago stating my scepticism along with a lot of others. I must admit that given SRAM and others have taken this step a lot of the issues which were stated have been overcome (the cooling of the disc rim, the wheel rigidity). I think the key will be pro-peleton adoption. I must say that I am not sure, given the slicker, thinner tyres than disc brakes offer much better braking (the wheels will still lock up and skid as much as they currently do).

There is something you say about downhill and Enduro mountain bikes, but these (to the uneducated road cyclist) wouldn't appear to be as weight and aero conscious. In fact the key component of these bikes appears to their robustness and rigidity and that what is good for the grizzly bear may not work for the cheetah.

Avatar
picko | 10 years ago
0 likes

Another so-called 'scientific' aero test performed without the biggest source of drag (a rider) on board. The results have no meaning in the real world

Avatar
broomwagonblog replied to picko | 10 years ago
0 likes
picko wrote:

Another so-called 'scientific' aero test performed without the biggest source of drag (a rider) on board. The results have no meaning in the real world

But a rider will offer the same wind resistance regardless of the same bike having disc or rim brakes.

Avatar
mybrainthinksim... replied to broomwagonblog | 10 years ago
0 likes

The rider will seriously affect the air flow to the rear brake.

Avatar
badkneestom | 10 years ago
0 likes

Good attempt to spin that story to a new reason to buy the latest and 'greatest'

Avatar
Alb | 10 years ago
0 likes

Mmm, hope that wind tunnel time wasn't too expensive  37

Avatar
ridein | 10 years ago
0 likes

A bike with a disc brake configuration would be significantly better using road rims designed for disc brake usage, or in other words NO brake track.

Avatar
Mat Brett replied to ridein | 10 years ago
0 likes
ridein wrote:

A bike with a disc brake configuration would be significantly better using road rims designed for disc brake usage, or in other words NO brake track.

"This change [the development of disc brakes for road bikes] will stimulate designers to come up with more aero hub designs while carbon and alloy rims can have the braking track removed, allowing for improved aerodynamics."

Avatar
imaca replied to ridein | 10 years ago
0 likes

Since high end wheels like Zipp already shape the brake track to the rim profile (ie the brake tracks are not parallel to each other) it seems highly unlikely the advantage (if any) will be significant. I know people keep saying it, but at the moment it seems little more than wishful thinking.

Avatar
seabass89 | 10 years ago
0 likes

"Culprit think - although this is nothing to do with the wind tunnel data - that a disc brake’s higher level of braking performance allows riders to slow later and corner faster than with rim brakes."

I love the word "think." It makes so extremely little academic sense.

Latest Comments