At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.
Good scores are more common than bad, because fortunately good products are more common than bad.
The Piggy Zip Case from 76 Projects is a well-made saddle bag that is surprisingly roomy considering its diminutive size. It keeps your kit secure and the elements out for what is not a bad price. The only little extra I'd like to see is a loop to attach a rear light.
The main thing I like about the Piggy Zip Case is its shape – it's exactly the same as a fresh 'out of the box' 700C inner tube, it just fits so snug.
While sounding trivial, it means that the Piggy stays in exactly the right profile for the zip to flow freely when you undo or close it, even when it is packed full with other kit.
It has a capacity of 0.45 litres, and I could comfortably get a tube, patch kit, multi-tool, two tyre levers, a CO2 canister and the head for it without overstretching it and putting pressure on the zip.
Inside is an elasticated pocket that you can tuck a debit card or cash into so it doesn't float around inside the pack.
The Piggy Zip Case will work with The Piggy storage mount, or you can attach it to your saddle rails on its own using a strap, as I have here. (The strap puts the price up by £3 – without it, the case is £22.)
The strap used for attaching it to the saddle rails is wide yet thin, which means it holds the bag securely without any swing, and because of its lack of bulk means it won't rub on your inner thigh if you have large legs – something I have had an issue with, with other packs.
To keep the spray out, the Piggy Zip Case uses a 300d polyester waterproof fabric with a PU coating. It certainly keeps the elements at bay and while I was concerned about the fact that the zip was only water resistant, I didn't have any issues with ingress on very wet rides of a couple of hours or so.
On the whole I really like the Piggy Zip Case. It is very well made with no rough edges or stitching, and looks and feels a much higher quality than its £25 price tag would have you think.
The only thing it does lack is a loop for fitting a rear light. Most of us fit our lights on the seatpost, and while most will be fine attaching one lower down because the the Piggy isn't that large, if you don't run much seatpost you may struggle. Most saddle packs offer this solution, so it is a shame not to see it here.
Price-wise it competes well against the slightly larger PRO Discover Saddle Bag at £40 while still offering similar levels of waterproofing.
It's bigger and better secured than the Arundel Pico Seatbag, too, which comes in at £24, but you can spend less – Giant's 0.6L waterproof saddle bag is £16.99, and Topeak has a few options that are less than £20.
Overall, as simple as the saddle bag is, 76 Projects has really focused on the details that make the difference. It's a great shape and just works really well while coming in at a decent price.
Really well-thought-out design and surprisingly roomy for such a small saddle bag
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: 76 Projects Piggy Zip Case
Size tested: 115x75x60mm
Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
76 Projects says, "The Piggy Zip Case is sized to perfectly fit The Piggy and Little Piggy on bike storage. It can also be strapped directly to your bike frame or saddle rails.
"Easy to remove for washing, security, and switching between other PIGGY equipped bikes."
It's a cleverly thought out design and carries a lot more than I was originally expecting.
Tell us some more about the technical aspects of the product?
From 76 Projects:
Room to accommodate all your ride essentials.
Large water-resistant zip for easy access.
Zip pull for use with gloves.
300d Polyester waterproof fabric with PU coating.
Super tough & grippy Hypalon base and top strap.
Inner pocket for small items.
You can get cheaper – Giant's 0.6L waterproof saddle bag is £16.99, for example – but considering the quality, I think you're getting your money's worth, and it's competitively priced against some of the opposition.
Tell us how the product performed overall when used for its designed purpose
It carries more kit than I expected and keeps the elements out.
Tell us what you particularly liked about the product
It's very good and sits well on the bike.
Tell us what you particularly disliked about the product
No loop to attach a rear light.
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your overall score
An all-round quality piece of kit. The shape means it makes the most of its packing space and it does a great job of keeping the elements out.
About the tester
I usually ride: This month's test bike My best bike is: B'Twin Ultra CF draped in the latest bling test components
I've been riding for: Over 20 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed,
With 20 years of road cycling and over 150,000 miles in his legs it's safe to say Stu is happiest when on the bike whatever the weather. Since writing his first review for road.cc back in 2009 he has also had a career in engineering including 3D-CAD design and product development, so has a real passion for all of the latest technology coming through in the industry but is also a sucker for a classic steel frame, skinny tyres, rim brakes and a damn good paintjob.
His fascination with gravel bikes is getting out of control too!