The Prestacycle Professional Three Way 'Y' Bits Tool is a premium quality workshop tool that should last a lifetime as it uses standard 1/4in hex bits which can be replaced if and when they wear out. It also means you can make up your own combination of bits – and this is where it shines.
This three-way tool comes with the holder – the three-way tool itself – and two bit holders, each containing six bits.
> Buy now: Prestacycle Professional Three Way 'Y' Bits Tool for £30 from Prestacycle
Both the tool and the bits are premium quality. Prestacycle doesn't quote a maximum torque for the tool, but it worked fine up to full GRRR.
The included bits are a good selection, covering the vast majority of fasteners you might find on a bicycle. Specifically, they are 2, 2.5, 3, 4, 5, 6 and 8mm hex; 10, 20, 25 and 30 Torx, and a Phillips 1.
Round bit holding
The round bit holders have a hole in the middle that fits the three-way tool's arm. It can be used to stand the tool in...
...or to store up to three round bit holders. And still stand the tool.
The holders work well for standing the tool up and for not-losing-bits purposes.
The experience of extracting and inserting bits doesn't feel as premium as the rest of the tool, though. As Steve found when he was reviewing the Prestaratchet Micro, it's quite fiddly to pull the bits out – it's not a one-handed operation – and the writing on the bits (if you've oriented them so the writing is visible) is partly obscured by the holder.
They are certainly no patch on my holy grail of bit holding and ease of swapping – the case for the Topeak Torq Stick Pro I reviewed a while ago. But then that's a rather different beast, costing £164.99 (including the tool and bits).
Three-way bit holding
The Pro version of the three-way tool itself has what Prestacycle calls MagGlide – a mechanism that holds the bits more securely than they would with just the magnet you get on the non-Pro version. The idea is that the bit stays in the tool until you release it. And that would be great if it worked.
I found the bits came out too easily for my liking, and more easily than I thought they would based on Prestacycle's product information. I can pull bits out with little effort, though it is easier if you release them first.
The upshot of this is that the bit can stay in whatever you're nipping up or undoing, rather than staying in the tool. Thru-axles are a good example of this, an application for which I think a three-way tool is ideal. Or would be if the bit didn't stay in the axle every time.
If I had bought this tool, I would probably look at investing in Prestacycle's (or another brand's) longer 50mm hex bits, so you can retract the tool from the fastener by holding the hex bit itself. Though this sort of workaround shouldn't be necessary.
Is it the best thing since sliced bread?
I've been using a Park Tool AWS1 (with 4, 5 and 6mm Allen keys) for years. I like using it, it has a place on the tool board in the shed, and it gets used regularly. But not for everything, because not every fastener on a bike is suitable for a three-way tool shape. Sometimes there isn't the space for the two other arms to rotate – disc brake calliper bolts on a bike with mudguards, for example.
All this is a long-winded way of saying that I'm down with three-way tools. Where the Park Tool one is utilitarian and does the job, the Prestacycle is beautifully made and feels reassuring in the hand. Using the tool – ignoring the bit-changing niggles for a moment – is a joy.
> Six essential tools for cyclists who do their own bike maintenance
And I'm fully on board with the exchangeable bits, especially from a durability point of view. If you wear out one of the bits through (ab)use, you put a new bit in and away you go. With the Park Tool type, it's game over.
For myself, the combination of 4, 5 and 6mm hex key is the most useful one and is how I had it the vast majority of the time. I can imagine, though, that it would be very useful to have your own custom combination of hex bits on a three-way tool.
Value
On the face of it, £30 sounds like a lot, especially if you compare it with the Park Tool AWS1, which is £16.99 (less if you shop around). And there are versions of the same type that are cheaper still, like the Halfords one for £5.99.
Neither of those has exchangeable bits, though, so if you round one off, you need to spend again.
If you do want exchangeable bits, the only cheaper option I found was Prestacycle's non-Pro version, which costs £20. You don't get the MagGlide system, and you don't get the two round bit holders with 12 bits either. If I was going to spend, I'd go for the Pro.
Conclusion
Overall, this is a well-made tool that looks beautiful and should last for as long as 1/4in hex bits are available. It's a premium tool, and with the 12 bits included, I think £30 is a fair price.
The MagGlide system doesn't hold the bits securely enough to match the premium feel of the rest of the tool, however, and the round bit holders hold them a little too well, though both of these niggles can be worked around.
For me, the durability and the option to build your custom combination three-way tool are the key selling factors. If this sounds like what you're after and you can live with the niggles, this will be just the job.
> Buy now: Prestacycle Professional Three Way 'Y' Bits Tool for £30 from Prestacycle
> Beginner’s guide to bike tools – get all the vital gear for basic bike maintenance
> Buyer's Guide: Best bike multi tools
Verdict
Premium quality tool that lets you build your custom combination and should last a lifetime
Make and model: Prestacycle Professional Three Way
Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
Prestacycle says:
Three Way, Any Way!
Professional model MagGlide(tm) sliders secure bits until you release them. Three-way tool using Prestacycle standard 1/4in Hex bits allows you to use the tool to suit the job. Replaceable bits means that if the tips wear-out, you don't throw away this tool like other Three way tools. Just replace the bits. There's no plastic here. Internal Reinforced structure underneath alloy body firmly holds the Stainless Steel shafts making this tool much stronger than other Three way tools.
The 'Y-Not' tool
Why Not? Why not put a Hex 5mm, Torx T25 and a PH1 in the tool? If that's what the job calls for, set your tool up that way. Why not carry 6 bits on the Shaft? Why not 12? Why not our full 18 bit set? Our six bit round shaft mount holders fit these shafts. Use up to 3 holders to carry 18 bits anywhere you go.
Tell us some more about the technical aspects of the product?
This is what Prestacycle says:
MagGlide(tm) Secures bits until you release them
Heavy Duty Three way tool never needs replacing
Set-up your tool for the job and go!
Uses Standard 1/4in Hex Bits
Use our Round Bits Holder on any/all shafts
Good weight and excellent ergonomic grip
Reinforced Alloy body with Stainless Steel Shafts
Tool weight is 139 Grams!
Rate the product for quality of construction:
9/10
Rate the product for performance:
6/10
Getting the bits out of the round holder is not quite as smooth a process as I would like – it's not a one-handed operation. Also, the tool doesn't hold the bits as securely as Prestacycle claims. For actual fastening, the tool is great.
Rate the product for durability:
10/10
The tool itself seems strong and durable, and the bits are replaceable, so it should last a lifetime.
Rate the product for weight (if applicable)
9/10
The weight is reassuring – it speaks of quality while not being heavy.
Rate the product for comfort (if applicable)
9/10
It's a very nice tool to use, feels very comfortable in the hand.
Rate the product for value:
5/10
Tell us how the product performed overall when used for its designed purpose
For those bolts where a three-way tool is the right shape, it works very well; absolutely no quibbles there, a joy to use. But I'm not so convinced about the removable tools part of the equation, as the round bit holders hold the bits a bit too securely, while the tool itself lets go of them a bit too easily for my liking – certainly not as secure as advertised.
Tell us what you particularly liked about the product
The quality of the tool and the bits; the fact that bits are replaceable when they are worn out.
Tell us what you particularly disliked about the product
The bit holders are a bit too fiddly to use; the three-way tool could hold the bits more securely.
How does the price compare to that of similar products in the market, including ones recently tested on road.cc?
We haven't tested similar products before, but it is more expensive than other three-way tools, which is only to be expected.
Did you enjoy using the product? Yes – though I didn't enjoy swapping the bits as much.
Would you consider buying the product? No – I'd probably buy a cheaper multi tool.
Would you recommend the product to a friend? Only if they were set on having non-standard bits on a three-way tool.
Use this box to explain your overall score
This tool is well made, is a joy to use for fastening, and should last you a lifetime. I think the price is about right too. I'm not convinced about the round bit holders, but I think that's more personal preference than something wrong with the tool. Where the tool is objectively let down in my view is that the MagGlide system doesn't hold the bits as securely as the product information on Prestacycle's website would have you believe. But it's still a good tool, and if the bits were held securely it would be an excellent tool – and if the bit holders were as good to use as the Topeak mentioned in the review, it would be exceptional.
Age: 44 Height: 1.78m Weight: 77kg
I usually ride: All of them! My best bike is: Ribble Endurance SL disc
I've been riding for: Over 20 years I ride: Most days I would class myself as: Expert
I regularly do the following types of riding: cyclo cross, commuting, touring, club rides, mtb, Zwift
It is so easy to obtain false number plates for vehicles and that companies selling such number plates are so easily able to use myriad excuses get...
I am quite surprised. I recall reading (indeed ages ago....emphsis on the ages) drivers in Italy were respectful of cyclists on the road. ...
The Park Tool bottle opener is good. Assuming you drink beer and your brand hasn't switched to twist tops.
Or from another of their works: "if you are not completely satisfied with this product, you've been had".
* The comments you can imagine. "why are you spending millions when you can't mow the grass / fix the potholes and pavements?" "More concrete - how...
I'd argue it does because people who don't wear seat belts are generally risk takers and don't care for rules. ...
Not a picture of my bike but a video worth watching for some https://www.youtube.com/watch?v=jsbJojnbdYY
OK Steve.
Sorry to ruin it. I don't spend a lot of time being drafted. When I ride with the fast guys, I end up hanging onto the back. When I ride with...
What an idiotic waste.