Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Just in: Saffron Frameworks custom build - Matthew's Winter Bike

We take a closer look at London-based bespoke frame builder Saffron's latest creation

Bespoke frame-building has been enjoying a resurgence of interest in the UK over the past few years, with loads of new frame-builders popping up all the time. There’s even a dedicated show, Bespoked, that showcases the very finest examples of British bicycle building. London-based Saffron has been a regular at this show, where it has turned heads and won awards. 

Saffron Frameworks custom winter bike - down tube detail.jpg

Every bike Saffron founder Matthew Sowter creates is bespoke, tailored to the exact requirements of each customer. That’s the beauty and appeal of shunning the mainstream options and going down the custom frame route, you get a fully personalised bike not only built to your exact measurements, but finished just the way you want it. It's certainly not for everyone.  It's not the cheapest way to buy a road bike, but if you want to invest in a distinctive and customised bike, it might just be for you.

- Custom built frames: The choice, from steel to carbon

Saffron Frameworks custom winter bike - cable detail.jpg

The bike pictured here is actually Matthew’s own bike, his latest creation. It has been designed as  a winter bike and a showcase of the latest technologies that are becoming increasingly common on road bikes. Fortunately, Matthew and I are about the same height and his bike just so happens to be the right size (lucky me), and he kindly let me borrow it for a few weeks to see how it performs. You can read my review soon, but before that, here’s an overview of the bike. 

Saffron Frameworks custom winter bike - bottom bracket.jpg

“Cyclists living in the UK tend to get most of their miles in wet weather and low light on road surfaces that are not always perfect,” says Matthew. “For this reason I wanted to construct myself a “winter” bike which would also showcase some new technologies that have recently found their way into road cycling from other disciplines. This bike will also see regular mileage on my new commute, as I’m moving further away from the workshop.”

- 15 of the best steel road bikes

Saffron Frameworks custom winter bike - drivetrain.jpg

Matthew only works with steel. The frame is constructed from Columbus Zona tubing and it has been designed for disc brakes and full-length mudguards, with clearance for 28mm tyres with them fitted, or up to 30mm without the mudguards. Though the bike is intended as a winter bike, Matthew has sought to create a bike that can be used year-round, with the mudguards removed for summer use and the hidden eyelets maintaining the clean lines of the bike. 

Saffron Frameworks custom winter bike - fork.jpg

It's been built up with a Shimano Ultegra Di2 groupset with hydraulic disc brakes, with the rear brake hose and Di2 wiring internally routed. The frame uses Shimano’s modern Flat Mount disc fittings on the industrial looking dropouts, and a carbon fibre Kinesis Tracer fork up front. The fork has a regular quick release axle while the rear wheel uses a 142x12mm thru-axle. 

Saffron Frameworks custom winter bike - bottel bosses 2.jpg

The 28mm Schwable One Pro tubeless tyres are fitted to Kinesis Racelight Disc wheels, with 140mm Shimano disc rotors mounted to each hub using the CentreLock standard. There’s a 27.2mm seat post with a carbon fibre Fizik seat post and Brooks C13 Cambium saddle. Fizik also supplies the handlebar and stem, and there’s a Chris King headset and bottom bracket.

Saffron Frameworks custom winter bike - front light.jpg

A smart demonstration of the attention to detail offered by Saffron is the neat integration of the Supernova Airstream 2 light and matching Tail Light 2. The front light is fixed to a small bracket mounted to the fork, and houses the battery that powers both lights, with the cable to the rear light routed inside the frame. The front light projects 205 lumens with a run time between 2.5 and 7-hours, with three brightness modes available.

Saffron Frameworks custom winter bike - seat stays.jpg

The whole bike weighs 9.71kg (21.40lb).

It’s a beautiful bike, both in its appearance - the colour matched mudguards are a lovely thing - and the attention to detail. Almost too nice to ride in the rain and mud covered roads.

Saffron Frameworks custom winter bike - rear cassette.jpg

It’s a bike clearly built to provide comfort, whether it’s the daily commute or long training ride on a Sunday club run. The tyres provide comfort and grip, the mudguards keep road spray at bay, the lights are integrated into the bike so you never misplace them, and the disc brakes provide control for any weather you’re likely to encounter. 

Saffron Frameworks custom winter bike - seat post and saddle.jpg

There is no price for this build, but looking at the parts you can take a stab at what it’s going to cost. A Saffron frame set costs from £1,320 and the prices increase depending on the tube set you choose. Everything from Reynolds 632 to Columbus XCR is on offer. There are many options available as well and a host of finishes available, allowing you to personalise the bike to your tastes and requirements.

More at www.saffronframeworks.com and you can see some of the other Saffron builds here.

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

12 comments

Avatar
CharlesMagne | 8 years ago
0 likes

If I didn't already have a winter bike, I would be all over this like chamois cream.

Stunner.

Avatar
Nixster | 8 years ago
0 likes

Looks lovely - if that's his winter bike his summer steed must be a thing of rare beauty.

Just one question though - what's the crimp in the chainstay for?  Looks like the sort of thing usually done to provide clearance for the inner chain ring but obviously too far back towards the rear wheel for that.

Avatar
jollygoodvelo replied to Nixster | 8 years ago
0 likes

Nixster wrote:

Just one question though - what's the crimp in the chainstay for?  Looks like the sort of thing usually done to provide clearance for the inner chain ring but obviously too far back towards the rear wheel for that.

I'd assume it's heel clearance?

Avatar
hawkes | 8 years ago
1 like

Looks nice & well thought out.  It's good to see you've got the Road width PDW guards on with 28mm tyres........I'm hoping to get the same setup on my new winter build.  

Avatar
b0rderline | 8 years ago
0 likes

David, great that another bike is just in but I am still waiting for Your review of Kona Roadhouse. It should be soon You said. Can You tell me, when this "soon" will be ?:)

Avatar
David Arthur @d... replied to b0rderline | 8 years ago
0 likes

b0rderline wrote:

David, great that another bike is just in but I am still waiting for Your review of Kona Roadhouse. It should be soon You said. Can You tell me, when this "soon" will be ?:)

 

I'm not testing that bike. Think the review should be in soon though. I write many of these just in articles, but sadly I don't test all the bikes as well

Avatar
b0rderline replied to David Arthur @davearthur | 8 years ago
1 like

David Arthur @davearthur wrote:

b0rderline wrote:

David, great that another bike is just in but I am still waiting for Your review of Kona Roadhouse. It should be soon You said. Can You tell me, when this "soon" will be ?:)

 

I'm not testing that bike. Think the review should be in soon though. I write many of these just in articles, but sadly I don't test all the bikes as well

David, I did not know that You are not testing this bike. It's a pity because I like Your reviews  1
Thanks for the info!

Avatar
Rapha Nadal | 8 years ago
1 like

I love the custom painted mudguards! This strikes me as a very well thought out bike and it's good looking to boot. Chapeau that man.

Avatar
Accessibility f... | 8 years ago
0 likes

Lovely bike.  I think the lights are too low though, especially the back.

Avatar
David Arthur @d... replied to Accessibility for all | 8 years ago
0 likes

Peowpeowpeowlasers wrote:

Lovely bike.  I think the lights are too low though, especially the back.

I haven't found the front light too low, it projects a good beam onto the road. And I've been using an additional seatpost light as well for the night riding I've been doing

Avatar
oldstrath replied to Accessibility for all | 8 years ago
0 likes

Peowpeowpeowlasers wrote:

Lovely bike.  I think the lights are too low though, especially the back.

Front light is exactly where most dynamo lights are sited, and where I  put the Ixon on my singlespeed. Works very well, although  the angle looks a bit odd. I do wonder why not dynamo on this one. 

Avatar
David Arthur @d... replied to oldstrath | 8 years ago
1 like

oldstrath wrote:

Peowpeowpeowlasers wrote:

Lovely bike.  I think the lights are too low though, especially the back.

Front light is exactly where most dynamo lights are sited, and where I  put the Ixon on my singlespeed. Works very well, although  the angle looks a bit odd. I do wonder why not dynamo on this one. 

 

The angle of the light wasn't adjusted by the photographer for these shots. Our bad, we should try and make sure bikes are perfectly setup before they're shot and taken away by the reviewer. Needless to say, that isn't the angle the light has been while I've been riding it 

Latest Comments