Support road.cc

Like this site? Help us to make it better.

TECH NEWS

First ride review: Vitus Energie Evo CRS

In preparation for the upcoming cyclocross season, Stu gives his first thoughts on how this new bike behaves in the mud

The cyclocross season is nearly upon us so it’s the perfect time for us to get our hands on the brand new Vitus Energie Evo CRS which has been completely redesigned for 2021. This isn’t a full review, it's a run through of my initial thoughts and findings. On the whole, they’re very positive.

2021 Vitus Energie Evo.jpg

Many people would have you believe that there's little difference between a cyclocross bike and a gravel bike apart from a good dose marketing. There is a big difference, though. Gravel/adventure bikes tend to be endurance orientated thanks to an extended wheelbase and relaxed handling whereas cyclocross bikes are designed for an hour of racing. The Energie Evo feels like a race bike.

Vitus has altered the Energie's geometry from that of previous versions, with a longer top tube and a shorter stem.

"This puts your hands and bodyweight in a superior position for stable and predictive steering through technical terrain," says Vitus.

I've been on the 56cm model which comes with a 582mm effective top tube. That's very long for a bike of this size. The seat tube (centre to centre) is 514mm and the head tube is 166mm. The stack on this size is 590mm and the reach is 406mm, giving a stack/reach of 1.45.

So far, I’ve ridden the Vitus on gravel tracks, by-ways and through the woods via some very twisty and technical trails which, thanks to the recent change in the weather, have become wet and muddy.

2020 Vitus Energie Evo - riding 2.jpg

These conditions have really shown that the steering is quick and direct. As the Evo was sliding around on the relatively narrow 33m CX tyres (I’m more used to riding gravel bikes with 40mm+ rubber) the handling gets you out of a lot of trouble.

With loads of feedback from the frameset and the position that the overall geometry put me in, I could easily guide the Vitus around all kinds of obstacles. The fact that I could pre-empt where the front end would head allowed me to really keep the power on.

This’ll make a big difference on race day when you have to keep powering out of slow, muddy corners every lap.

2021 Vitus Energie Evo - bottom bracket.jpg

Stiffness levels for delivering that power are also impressive thanks to the wide bottom bracket junction (it's BB386EVO standard), the bottom bracket itself, and suitably chunky chainstays. Out of the saddle, climbing doesn’t show any flex in that area at all.

Those chainstays I mentioned provide loads of mud clearance; Vitus reckons this is one feature that sets the Energie Evo apart from its rivals. The ability to ride longer without the build up of mud affecting your performance has to be good news when you're racing.

Dropped seatstays and an integrated clamp are intended to provide compliance while the underside of the top tube has been designed to be comfortable when you're shouldering the bike. 

For this CRS model’s £2,499.99 price tag you are getting a decent level of kit, especially the SRAM Force 1x groupset.

2021 Vitus Energie Evo - bars.jpg

It’s 11 speed with a 40T chainring and an 11-32T cassette which is definitely more compact than you’ll find on most gravel bikes.

The flat-section Prime Doyenne alloy handlebar gives plenty of hand positions and the Vitus saddle is comfortable too.

2021 Vitus Energie Evo - saddle.jpg

Overall, I’m impressed by the Vitus Energie Evo CRS so far and I’m looking forward to riding it in the events I’ve got coming up over the next few weeks.

Here's the full spec list:

FRAMESET Energie Evo Carbon

BOTTOM BRACKET SRAM 386EVO

GROUPSET SRAM Force 1X 11 Speed

CRANKSET SRAM Force 1 X-Sync 40T

CHAIN KMC X11

CASSETTE SRAM PG-1170 11-32 11 Speed

BRAKES SRAM Force 1 HRD

ROTORS SRAM Centreline Centrelock, F-160mm R-160mm

WHEELS Prime Baroudeur Disc Aluminium Climcher, Tubeless

TYRES Vee XCX 700x33 Tubeless

THRU-AXLE Vitus Switch F-100x12mm R-142x12mm

STEM Prime Doyenne Lightweight Alloy

HANDLEBAR Prime Doyenne Alloy

SEATPOST Vitus Alloy

SADDLE Vitus Ti Rail

I’ll be back with a full in-depth review towards the tail end of September with my findings about what the Vitus is like to live with and race on.   

In the meantime, head over to vitusbikes.com for more details.

As part of the tech team here at F-At Digital, senior product reviewer Stu spends the majority of his time writing in-depth reviews for road.cc, off-road.cc and ebiketips using the knowledge gained from testing over 1,500 pieces of kit (plus 100's of bikes) since starting out as a freelancer back in 2009. After first throwing his leg over a race bike back in 2000, Stu's ridden more than 170,000 miles on road, time-trial, track, and gravel bikes, and while he's put his racing days behind him, he still likes to smash the pedals rather than take things easy. With a background in design and engineering, he has an obsession with how things are developed and manufactured, has a borderline fetish for handbuilt metal frames and finds a rim braked road bike very aesthetically pleasing!

Add new comment

1 comments

Avatar
TheBillder | 3 years ago
0 likes

How does it ride on the road? If you need a bike mostly for road but have an occasional gravel habit, are you best off with

a) A road bike which can take wide tyres and a set of knobblier rubber for gravel use

b) A gravel bike with a spare set of slicks (but sub ideal geometry for the road)

c) A CX bike with a spare set of slicks?

Latest Comments