Support road.cc

Like this site? Help us to make it better.

review

HJC Ibex Lotto Soudal helmet

8
£179.99

VERDICT:

8
10
A great all-round helmet for fit, ventilation, weight and comfort at a pro-level price
Weight: 
245g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Ibex is HJC's top flight race helmet which, as you can see by the Lotto Soudal team logos on this model, is already being used by the pro peloton. It's a good weight, very comfortable and impresses on the ventilation front, but like most top end helmets, you have to pay for it.

  • Pros: Shape and padding makes for a comfortable helmet, good at removing heat
  • Cons: Pricey

The Ibex is very similarly shaped to the Furion lid, HJC's aero offering, so it's no surprise I find it very comfortable. The shape suits my head perfectly and with some decent thickness padding I felt no pressure spots anywhere once everything was tightened.

> Find your nearest dealer here

Its lightness helps too. Weighing in at just 245g for this 57-59cm size, it doesn't feel as though you are wearing it at all.

hjc_ibex_lotto_soudal_edition_helmet_-_side.jpg

My only real criticism of the Furion was its lack of ventilation, even for an aero helmet with minimal venting, but the Ibex doesn't suffer at all. It might not be a full aero helmet but compared with a lot of others on the market it does have minimal venting – 16 in total – so I was really impressed with the performance.

With four large vents at the front and two smaller ones (which are positioned so that they will hold your sunglasses should you need somewhere to store them), it really lets the breeze in.

hjc_ibex_lotto_soudal_edition_helmet_-_front.jpg

There are more vents on the top and at the rear of the helmet to let wind through, and while it is difficult to confirm without seeing it in a wind tunnel (which HJC does actually have), the shape of the vents and shell certainly look like they have been sculpted to channel air over the top to keep you cool from front to back.

hjc_ibex_lotto_soudal_edition_helmet_-_back.jpg

Right at the rear you get another selection of vents which work like exhaust ports.

Bearing in mind that a lot of the test rides were taking place in heat ranging from the mid-20s to low 30s, as long as I was moving at a decent pace the airflow was impressive.

The HJC confirms to EN 1078 and has a special cradle skeleton system which sits inside the polystyrene. In the event of an impact it's designed to keep the structure of the helmet intact should a secondary impact happen before you stop moving.

For fit, the Ibex uses a simple thrumbscrew to tighten the cradle at the rear. It's not as advanced as some systems I've tried but it does the job and with bare hands it's easy to adjust things on the fly. The thumbwheel is a little small to adjust with winter gloves on.

hjc_ibex_lotto_soudal_edition_helmet_-_tension_system.jpg

You get two sets of padding in the package and it is well positioned inside the helmet. It's called X-Static, and uses silver in its construction to kill bacteria. Should it get overwhelmed and needs a wash, HJC provides a mesh laundry bag to pop the padding into so it doesn't get snagged in the washing machine.

hjc_ibex_lotto_soudal_edition_helmet_-_inside.jpg

As always with top-end helmets, the Ibex looks like a lot of money for something that passes exactly the same safety test as one a tenth of the price but if you read my review of the £29.99 Raleigh Extreme Pro Helmet you'll see why I think it makes sense to spend as much as you can.

Saying that, though, a lot of very good performing helmets are a fair bit cheaper. Bell's Stratus MIPS, for instance, costs £129.99 for just a little bit more weight but Neil reckoned it was near perfect, really close to the top flight Zephyr model at £199.99.

> Buyer's Guide: 17 of the best high-performance helmets

Another helmet used in the pro peloton is the Kask Valegro, which was designed for Team Sky. It costs £169 and weighs just 206g, so the Ibex isn't completely out of the ball park.

If the team look isn't your thing you can get the Ibex in matt black/gold, matt white/gold, matt teal/gold, matt/gloss black, glossy white/silver, burgundy/black and pale blue/white. There are three sizing options too: XS/S (54-56cm), M/L (57-59cm) and XL/XXL (60-63cm).

Verdict

A great all-round helmet for fit, ventilation, weight and comfort at a pro-level price

road.cc test report

Make and model: HJC Ibex Lotto Soudal helmet

Size tested: M/L

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

HJC says, "Helmet IBEX is one of high-end helmet designed from HJC. IBEX improves on aero dynamic and ventilation. It has integrated with Venturi Dynamics to balance the air resistant force with exhaust ventilation function. You are able to experience more aerodynamic and optimal function with impressive well-balanced design."

Tell us some more about the technical aspects of the product?

From HJC:

Wind Tunnel Tested

Aerodynamic Design

Reinforcement Structure

Double In-Mold Construction

Advanced Air Channel System

Venturi Dynamics

Goggle Mount

Adjustable fit system

16 Ventilations

Feather Light 220g (+/-10)

X-static

CE EN 1078 Certificate

KC Certificate

Rate the product for quality of construction:
 
8/10
Rate the product for performance:
 
9/10
Rate the product for durability:
 
8/10
Rate the product for weight (if applicable)
 
8/10
Rate the product for comfort (if applicable)
 
9/10
Rate the product for value:
 
6/10

Not the most expensive we've seen, but up there with the best of them.

Tell us how the product performed overall when used for its designed purpose

A really light helmet that is comfortable and really gets the air moving through the vents.

Tell us what you particularly liked about the product

Comfort and ventilation.

Tell us what you particularly disliked about the product

Other than the outlay, I can't really fault it.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes, but not sure I could bring myself to shell out full whack...

Would you recommend the product to a friend? Yes

Use this box to explain your overall score

This helmet is really good in so many ways, and I especially love its comfort levels. The price is high, though, even for a peloton-level skid lid, but it's still an 8 overall.

Overall rating: 8/10

About the tester

Age: 40  Height: 180cm  Weight: 76kg

I usually ride: This month's test bike  My best bike is: B'Twin Ultra CF draped in the latest bling test components

I've been riding for: Over 20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed

As part of the tech team here at F-At Digital, senior product reviewer Stu spends the majority of his time writing in-depth reviews for road.cc, off-road.cc and ebiketips using the knowledge gained from testing over 1,500 pieces of kit (plus 100's of bikes) since starting out as a freelancer back in 2009. After first throwing his leg over a race bike back in 2000, Stu's ridden more than 170,000 miles on road, time-trial, track, and gravel bikes, and while he's put his racing days behind him, he still likes to smash the pedals rather than take things easy. With a background in design and engineering, he has an obsession with how things are developed and manufactured, has a borderline fetish for handbuilt metal frames and finds a rim braked road bike very aesthetically pleasing!

Latest Comments