Support road.cc

Like this site? Help us to make it better.

SRAM S900 Singlespeed carbon brake lever

8
£100.99

VERDICT:

8
10
Very lovely, but SRAM's alloy equivalents are half the price
Weight: 
247g
Contact: 
www.saddleback.co.uk

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

SRAM's S900 brake lever is something a bit different. It's not often you get to see a brake-only lever for a road bike these days, they're all modern fancy units filled with all sorts of gear-changing trickery, but there's a small but significant army of fixed (the ones that use brakes at least), one-gear and (even if SRAM label these as a 'singlespeed' lever) a bunch of bike riders that use down-tube and bar-end shifters that don't need or want a brake-and-gear combo.

SRAM pander to the thigh-rubbers and the weight-weenies of that market with these stealthy swanky composite goodies. Essentially a SRAM DoubleTap lever with all the geary internal gubbins removed the S900's are designed to work with both road calipers and cantilevers. Available singly at £54.99 or as a pair for a cool £101.

If you've used SRAM levers before you'll be familiar the shape of the hoods, but if you haven't it's similar to the square and flat-topped of old 10spd Campagnolo but with the slightly sharper edges of old Shimano, and not to dissimilar to the new Shimano hoods, anyway, there were no issues with comfort on test paws, and no blisters or sore bits even when bounced around for long rides off-road on the 'cross bike.

The hoods angle subtly to the outside when they reach the, erm, horn and the lever kinks out further giving the front of the bike a certain jug-eared look but in operation the sticky-outness works surprisingly well. Not having the brake lever pointing straight down as is the norm initially feels a little odd, but the angled lever soon settles more naturally to the hand. Both whilst on the hoods and in the drops the fingers don't have to wrap as far round the front to operate the lever, this is a rather nice action and a boon for smaller handed riders whose digits can sometimes be stretched onto standard levers. To help stumpy phalanges matters further a 3mm allen key hides under the hood rubber to adjust the reach of the lever to the bar. Feel at the lever would make Goldilocks proud, not too baggy, nor too snappy, in fact just right, but there's no return spring which might be a problem for those that prefer gritty cables.

One of the side effects of having all the gear-offal removed to make this a cheerfully light brake-only lever is that the body is a hollow empty shell free of substance that's happy to flex when hauling on the hoods, noticeable even to those not particularly strong in the hauling department, and this repeated play in the lever caused the clamp to be gently wiggled loose so that the bolt had to be tightened up a good full turn after a month or so of use. Since then it's been trouble free though it might need a regular eye kept on it. Another aspect of the gear guts removal is the gaping hole in the body where a DoubleTap shifter should be poking out, initial worry was that this open wound would let all sorts of gunk and kipple in, especially if used on a cyclo-cross bike where a single chainring is often run leading to a lever being gear redundant or on a trendy town bike where gutter spray and tramp's juice could get sucked in. But these fears have been totally unfounded. And while on the caveats, beware if you plan on using these levers on brakes with no cable release lever on the body, the SRAMs have no brake release spigotti on the body (like Campag brakes have) so there's no way of releasing a tight brake for quick wheel removal.

Verdict

Considerably pricier than the few still quite-nice-lever only offerings and a bit cheaper than the lottery-win only Campag units the SRAM-S900s are a light, ergonomic and comfortable brake lever whose carbon blade gives them a subtle air of high-class trinketry, their lightweight induced flex might be an issue to muscly riders though and the lack of a release system could be a niggle to others. If these are a little too aristocratic for your build then the blue-collar SRAM S500 is the alloy levered variant that pleases the wallet at about half the price.

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: SRAM S900 Singlespeed brake lever

Size tested: n/a

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

SRAM enthuse that the 900 is the singlespeeder's choice, the perfect match for riders needing only a single gear. With a unidirectional carbon lever it's fully compatible with SRAM Red, Force and Rival brake calipers.

It's actually more versatile than that, being useful to anyone that doesn't need or want gear-changing machinery in their brake levers, and they will work with other makes of road caliper or cantilever. They don't mention the price.

Tell us some more about the technical aspects of the product?

247g of unidirectional carbon.

Rate the product for quality of construction:
 
9/10
Rate the product for performance:
 
8/10
Rate the product for durability:
 
8/10
Rate the product for weight, if applicable:
 
9/10
Rate the product for comfort, if applicable:
 
9/10
Rate the product for value:
 
5/10

Tell us how the product performed overall when used for its designed purpose

The levers worked perfectly well as brake levers that didn't need to change gear as well.

Tell us what you particularly liked about the product

The comfy shape of the hoods and lever angle, the light weight, the carbony.

Tell us what you particularly disliked about the product

That slowly unwinding clamp bolt, and the lack of a brake release spigotti was a minor annoyance.

Did you enjoy using the product? Yes

Would you consider buying the product? They are lovely but to be fair I'd probably plump for the cheaper alloy versions

Would you recommend the product to a friend? Yes

Overall rating: 8/10

About the tester

Age: 42  Height: 180cm  Weight: 73kg

I usually ride: It varies as to the season.  My best bike is: The one I\'m on at the time

I've been riding for: Over 20 years  I ride: Most days  I would class myself as: Experienced

I regularly do the following types of riding: road racing, cyclo cross, general fitness riding, fixed/singlespeed, mtb, Fun

Jo Burt has spent the majority of his life riding bikes, drawing bikes and writing about bikes. When he's not scribbling pictures for the whole gamut of cycling media he writes words about them for road.cc and when he's not doing either of those he's pedaling. Then in whatever spare minutes there are in between he's agonizing over getting his socks, cycling cap and bar-tape to coordinate just so. And is quietly disappointed that yours don't He rides and races road bikes a bit, cyclo-cross bikes a lot and mountainbikes a fair bit too. Would rather be up a mountain.

Add new comment

3 comments

Avatar
j1mmy76 | 13 years ago
0 likes

I trreated myself to a pair of these last month. They're really comfy and look the part too, which let's face it, is what it's all about.  3
Shop around though, you can get them for about £75 a pair online.

Avatar
VecchioJo | 13 years ago
0 likes

i've used Tektro R200As on another bike, they rattled a bit and i had to keep pushing the pivot pin for the brake lever back in when it rattled loose, it was annoying, and they weren't carbon

Avatar
Aapje | 13 years ago
0 likes

Three times the price of Tektro R200A's for eviscerated STI's with various problems.  39 No, thank you.

Latest Comments