Many city dwellers can only dream of dry, secure garages and similar storage space. Enter the Cycloc Endo which continues the marque's penchant for stylish, yet practical solutions for keeping one's pride n' joy indoors without flouting health and safety regulations, detracting from the décor and/or inducing acute domestic disharmony.
The Endo is a hinged hook that cantilevers to accommodate different rim and tyre diameters and will support bikes with tyres up to 2.3 inches in its generous, rubberised channels, defending walls from unsightly marks.
Like most good engineering, simple design and clever materials are recipes for minimal strife and most of us will have it firmly attached to the wall in thirty uninterrupted minutes, allowing a further five or so to fully (though not literally!) digest the instructions. Thoughtfully the kit includes a drilling template, minimising error and moreover, faff.

However, it's worth noting the design has a maximum 20kg payload. Bikes up to 15kg can supposedly be hung as loftily as ceilings and rider stature allow, but anything heavier must rest with its rear wheel on terra firma. Personally, my limit's nearer 13kg, especially if the Endo is used in conjunction with a slender U lock since my fully equipped Univega felt as if it could rip free with costly consequences.
Chunky composites look stylish and keep strain to an absolute minimum, making it a better choice for partition walls so beloved of house conversions or walk-in cupboards for those lucky enough, or needing to hide bikes from prying eyes.
Ours was an off-white, which blended nicely with calico walls, though it developed a grimy patina within a matter of days. Thankfully, there are several vibrant alternatives including green, orange, blue, red, violet, yellow and matt black.
The Endo is well-engineered and very easy on the eye but there are more secure solutions for sheds, garages and outbuildings. This is definitely attractive indoor bike hanging rather than attack-proof outdoor storage. Leaseholders should read the terms of their tenure very carefully and experience suggests those renting privately on assured short hold tenancies would be ill-advised to install one without their landlord's consent.
Verdict
Nicely made bike storage that's easy to install and looks good.
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: Cycloc Endo
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
"Fold flat vertical storage
Attractive, vertical cycle storage, for home, office or retail
applications.
Ideal for high density installations with little space,
secure four point fixing, fixings included.
Protect your wheels and wall with wide rubber contact
points, front & rear wheel pad included.
Hollow hinge accommodates a conventional bicycle
lock.
Discrete fold flat facility, only 3.2cm thick when folded."
Tell us some more about the technical aspects of the product?
Composite construction, maximum 20 kilo payload, hollow hinge locking function, composite construction, "rubber" contact points, accommodates wheel sizes between 16 and 29 inches, 650-700c. Includes screws and rawl plugs.
Rate the product for quality of construction:
8/10
Rate the product for performance:
7/10
Rate the product for durability:
7/10
Composites should live long and happy lives.
Rate the product for weight, if applicable:
7/10
Surprisingly light, yet reassuringly robust.
Rate the product for comfort, if applicable:
7/10
Nice to use so long as it's installed at a convenient height.
Rate the product for value:
7/10
Tell us how the product performed overall when used for its designed purpose
Overall, the Endo is an excellent solution to indoor storage in homes/offices. Easy to install and on the eye, there's really nothing to dislike, though some caution's required when partition walls host heavier bikes and gamekeeper type systems are better options for owner occupiers in rougher areas.
Tell us what you particularly liked about the product
Lovely design, aesthetically pleasing, nicely made.
Tell us what you particularly disliked about the product
Nothing but keep an eye on the payloads and there are better options for garages, sheds and similar outbuildings.
Did you enjoy using the product? Yes.
Would you consider buying the product? Yes.
Would you recommend the product to a friend? Yes.
Age: 40 Height: 1m 81 Weight: 70 kilos
I usually ride: Rough Stuff Tourer Based around 4130 Univega mtb Frameset My best bike is: 1955 Holdsworth Road Path and several others including cross & traditional road
I've been riding for: Over 20 years I ride: Most days I would class myself as: Experienced
I regularly do the following types of riding: cyclo cross, commuting, touring, fixed/singlespeed, mtb,
In my sample size of one , I get 'given' much more room riding my mountain bike by passing drivers. On my road bike I get a lot of close passes...
3 hours ? Mine is good for at least 6 hours. Even the old just radar sensor could cope with that and the light + radar is meant to have a 10 hour...
I think space makes it more aero ? Like the Hope GB track bike ?
For the first time ever, I'm impressed with the overall weight of a Pinarello. Given this bike also tests very well aerodynamically, (and again...
I know! I've mentioned this before on here but in firearms training one of the first thing's one's told is that if you make an error that could...
Bike jackings -was rife in South Africa when i left and probably still is. Sad state of affairs, I hope the rider heals up quickly and suffers no...
What about Miguel Indurain?
Wow! I dream of getting 6,000km out of a chain! My bike has only just cleared 5,000km...
Maybe we need to take a note out of the drivists playbook and label the lack of secure bike storage as discriminatory against the disabled
Well, I passed this lot yesterday and they seemed to be enjoying the ride... (apparently it was the national chopper convention or something!).