At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.What the road.cc scores mean
Good scores are more common than bad, because fortunately good products are more common than bad.
Pro Bike Tool's Torque Wrench Set is easy to use with good quality bits, an extensive torque range and a handy ratchet system that makes torquing bolts easy and accurate. The price is really good, especially given the quality of construction. Highly recommended for the avid home mechanic.
The set combines a load of great features that make it a very easy tool to use quickly. It also beats many rivals on price and comes with an extensive range of bits.
Opening up the plastic case, there's a very pleasant quality feel about it, the metal clasp in particular.
Inside you'll find the torque wrench, a 10cm extension bar, Torx 10, 25 and 30 bits, and hex key bits of 2, 2.5, 3, 4, 5, 6, 8 and 10mm. Each bit sits in its own 1/4inch square driver socket. The torque range is from 2Nm to 20Nm.
Setting up the tool is a simple case of selecting the required bit and placing it on the square driver, remembering to depress the bit release button in the centre of the tool head.
Setting the torque means pulling down the sliding collar and holding it as you rotate the silver part of the tool. This is the fastest way to move from the unloaded position to roughly where you need to be. You can then micro-adjust using the 0.1Nm increments that line up easily with the scale.
Torquing a bolt is a simple process with the bits slotting in nicely to the bolt heads. The bits seem to be well made and I can't see any wear on the S2 steel bits.
The 72-tooth ratchet is very quick to engage and helps to speed up the torquing of bolts, especially if you're tightening down a difficult-to-reach bolt. Once up to the required torque, the tool gives a definite, if slightly inaudible, click.
The tool will continue tightening the bolt if you keep pushing after the click so you'll need to be careful on tight tolerances, but in practice, this is a very easy tool to use quickly.
The Pro Bike Tool set is 'calibration tested for accuracy to ISO 6789:2003'. That means that before it leaves the factory, it gets tested and you get a little sheet with your torque wrench's performance. This one I have here was no more than 0.3Nm out on the three set torque tests. Over time, you might want to get this recalibrated, especially if you're using it a lot and needing some low torque settings.
The only other torque wrench I have is Park Tool's ATD-1, and testing them together showed that they agreed with what torque each bolt was at.
The build quality seems really good, with solid materials being used for both the wrench and bits. Add to that the fact that you can get this re-calibrated after a few years of use and I'd say this is something that'll last a lifetime, especially for home mechanics.
At £57.99, it beats its rivals on price easily. I liked using the PRO 3-15Nm Torque Wrench Set, but at £109.99 it's just overpriced for what it is. X-Tools' Pro Torque Wrench and Bit Set is also more expensive at £69.99 and comes with fewer bits and a smaller torque range.
I am never going to be able to afford £130 for the Effetto Mariposa Giustaforza 1-8 Deluxe torque wrench, plus it has a tiny torque range.
For me, this is the obvious choice. A quality tool with very good accuracy, incremental adjustment across a wide torque range, a great selection of bits, a ratchet head for speedy tightening, and a great price. My only wish is that the click to indicate torque reached was slightly more distinct.
Great price, well built, easy to use... there's a lot to love
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: Pro Bike Tool Torque Wrench Set
Size tested: One
Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
From Pro Bike Tool:
Precision measurement from 2.0 to 20Nm, micro adjustment to 0.1Nm.
Extension bar and 11 tool bits.
The dual drive wrench measures torque in clockwise and counterclockwise directions.
Pressure release and 'click' when correct torque achieved. Great for carbon components.
Calibration tested for accuracy to ISO 6789:2003
Tell us some more about the technical aspects of the product?
Pro Bike Tool lists:
9.8 L x 3.3 W x 2.2 H inches / 25 L x 8.5 W x 5.7 H cm
1.65 lbs, 26.4 oz / 750g
S2 steel bits, Cro-Mo and Cr-V Steel ratchet
A really solid build that looks more expensive than it is.
Hard to judge without years of use, but I'm seeing no wear to the bits.
Vastly undercuts the Effetto Mariposa Giustaforza 1-8 Deluxe torque wrench (£130). The Pro Bike Tool has a much wider torque range and a wider range of bits.
Tell us how the product performed overall when used for its designed purpose
Brilliantly. It's very easy and quick to use, which makes me more likely to go and grab it instead of considering its use as a chore.
Tell us what you particularly liked about the product
The range of bits and torque settings mean that I'm yet to find something that this can't help with.
Tell us what you particularly disliked about the product
You've just got to be careful to notice the click. It's slightly subtle, but you're already working with care and attention, right?
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your overall score
All that stops this from getting a full five stars is the slightly hard to read scale and the slightly soft click.
About the tester
I usually ride: Cannondale Supersix Di2 My best bike is:
I've been riding for: 5-10 years I ride: Most days I would class myself as: Expert
I regularly do the following types of riding: road racing, time trialling, cyclo-cross, commuting, club rides, general fitness riding, I specialise in the Cafe Ride!
Son of a Marathon runner, Nephew of a National 24hr Champion, the racing genetics have completely passed him by. After joining the road.cc staff in 2016 as a reviewer, Liam quickly started writing feature articles and news pieces. After a little time living in Canada, where he spent most of his time eating poutine, Liam returned with the launch of DealClincher, taking over the Editor role at the start of 2018. At the weekend, Liam can be found racing on the road both in the UK and abroad, though he prefers the muddy fields of cyclocross. To date, his biggest race win is to the front of the cafe queue.