Support road.cc

Like this site? Help us to make it better.

Sheffield bike shops

Hi, I'm new to this forum and road biking. I am a MTBer who has inherited his Dads old steel bike.

I'm enjoying riding it but the seatpost needs to come up a couple of inches and it just won't budge - probably not moved for 25 years or so.

Can anyone recommend a good bike shop in Sheffeild for Road bikes - for buying and workshop stuff like the seatpost.

I live in Walkley so assume A.E. Butterworth would be a good start. Are Wilson (?) on City road a good bet as well?

And is JE James as good for road bikes as they are for MTBs?

Many thanks

If you're new please join in and if you have questions pop them below and the forum regulars will answer as best we can.

Add new comment

6 comments

Avatar
John_the_Monkey | 14 years ago
0 likes

Hope it's ok to post this here - thread full of stuck seatpost advice, and inspiration (perhaps) from Cyclechat;

http://www.cyclechat.co.uk/forums/showthread.php?t=29419&highlight=stuck...

Avatar
Tony Farrelly | 14 years ago
0 likes

Tried that on my bike when the post got stuck… it just bent the rod  2

Avatar
k0vic | 14 years ago
0 likes

Check Decathlon out for pretty decent priced stuff (huge store in the city), not sure about them doing any work themselves though. Plus you get to see just how much sporting equipment one company can fit into a warehouse sized store, it's crazy.
I've heard of a method involving drilling a hole through said stuck seat post, them inserting a rod of metal through lovely hole then giving the rod a ruddy good whacking with a hammer. Obviously a new seat post is required after using this method.  4

Avatar
Tony Farrelly | 14 years ago
0 likes

yeah I had to have one melted out once, the bikeshop said they did melted them out fairly regularly - they had a bloke who specialised in the job. Tried everything to get it out beforehand: WD40, penetrating oil, taking off the saddle and clamping the seat post in a vice and then trying to move the frame - two of us had a go at that and still it wouldn't budge.

Heat got it out, but I did have to re-paint the seat tube afterwards. Gave the bike to my brother in law who lives in Brighton and the new one seized in too a few months later.

Avatar
cactuscat | 14 years ago
0 likes

depends - if it's an alu post stuck in a steel frame sometimes the only way to get it out is to melt it out  39

Avatar
ctznsmith | 14 years ago
0 likes

WD40?

I found shifting all stuck parts on the steel frame I rescued as simple as spraying a liberal amount of WD40 into the join/gap and leaving to 'soak' for a while.

Latest Comments