Support road.cc

Like this site? Help us to make it better.

TECH NEWS

Shimano Di2 hydraulic disc brakes revealed

Leaked photo shows Shimano have developed Di2 hydraulic disc brakes for the road

So long as the big players were absent from the hydraulic road disc debate, you could pretty much come down on either side. But if Shimano and SRAM both think it's going to work, then it's probably time to sit up and take note.

Michiel van der Heijden rides cyclocross for the Shimano-sponsored Rabobank team and he helpfully posted a snap of his bike on Twitter yesterday before heading off for a ride. Not just any old bike, though: a previously unseen disc-only Carbon Giant CX frame running Di2… and hydraulic discs.

There's no official word from the component manufacturer on this kit so we're stuck with what we've got in the pic, but with no master cylinder visible anywhere on the bike it's obviously in the lever hood. We'd expect that, anyway: with Di2 there's precious little else in there so there should be plenty of room.

Spy shots of the SRAM system made it look like they were struggling to fit the cylinder in; Shimano's lever is more or less the same shape as a mechanical one. The drivetrain is Dura-Ace but the levers appear to be Aluminium; whether that's just because they're prototypes is anyone's guess.

The callipers themselves look a fair bit like Shimano's M785 XT units; they're the same shape and you can see the cooling fins of the Ice-Tech pads poking out of the top. Heat build up has often been touted as the main issue for discs on the road so it would make sense to use that technology which allows the brakes to run significantly cooler.

The rotors are both 140mm, probably XTR-level RT98s. This is a CX bike, so it won't necessarily be going near any long alpine descents; we'll wait and see what rotor sizes Shimano go for on the roadgoing versions of this system which will surely follow. They're bolted on to Shimano-branded wheels with what looks like a carbon rim and a 2-cross lacing, but they could be pretty much anything.

Giant have a close working relationship with Shimano; last time we went out to a press launch with them (for Ultegra Di2) the kit was bolted on to pre-production samples of the new TCR Advanced frame. In fact, it was the first time we got to ride it. So it wouldn't surprise us if they were working in tandem with Shimano on this in order to work towards a launch sometime later in the year. All, as they say, will be revealed...

The disc brake revolution is coming, then. Have a read of our industry insider article on the future of disc brakes.

David worked on the road.cc tech team from 2012-2020. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment

30 comments

Avatar
antozzi48 | 11 years ago
0 likes

The thing everyone is forgetting is that your fitting disc brakes to a wheel with no traction. The contact surface of the tyre is so small that it'll skid, I'd rather the pads slip than the tyre, imagine touching the brakes in a wet corner and the front wheel locking up #gravelrash!

Avatar
sodit | 11 years ago
0 likes

I suspose a half way house for upgrading would be to change the forks and have a front disc with a rear rim brake? Or is that a totally stupid idea?!

Avatar
ch | 11 years ago
0 likes

About the wheels locking up, is ABS impossible?

Avatar
dave atkinson replied to ch | 11 years ago
0 likes
ch wrote:

About the wheels locking up, is ABS impossible?

not impossible but really, really hard on a single track vehicle. that's why it's not caught on in motorbikes

Avatar
Seoige | 11 years ago
0 likes

I just bought a new carbon bike and I am putting my hands over my ears......all I am hearing is money, money and more money....loool.  20 . However, I will check them out first to see what all the fuss is about.  3 As I carress my beautiful carbon bike called Aphrodite, I whisper,'No baby! Me love you long time'  24

Avatar
TheOldCog | 11 years ago
0 likes

disc brakes rock, period.

Avatar
Yennings | 11 years ago
0 likes

Disc brakes are absolutely the way forward on our crappy, muddy, gravelly, horsesh!te-covered country lanes. Bring it on, I say.

Avatar
NeilXDavis | 11 years ago
0 likes

Bike components are certainly going to become fragmented in future years what with electronic and non...disc and non...I guess this is all good for manufacturers...

Avatar
Lungsofa74yearold | 11 years ago
0 likes

Actually, this now makes a lot more sense - i never really got the point of electronic shift systems before (a solution in search of a problem) but combining the two makes a lot of sense. That said, I still think discs make most sense because of the options they give you in relation to rims (material, lack of wear etc.) And braking in the wet - as someone else already pointed out, I can already lock my wheels up no probs in the dry.

Avatar
step-hent replied to Lungsofa74yearold | 11 years ago
0 likes
pastaman wrote:

That said, I still think discs make most sense because of the options they give you in relation to rims (material, lack of wear etc.) And braking in the wet - as someone else already pointed out, I can already lock my wheels up no probs in the dry.

This. I don't need more power generally on the road, or better modulation. The stopping power and modulation of hydraulics is more important to me on a mountain bike, where I've got a much bigger tyre contact patch and more grip. But the real advantages come from (a) wet weather performance - particularly in comparison with long reach calipers on my winter bike, which are still never as good as their short reach counterparts, and (2) the ability to play around with rim materials and designs without the need for a braking surface or the worry that you are literally scrubbing away your high end rims.

From an aesthetics point of view, I'm still not sure about them - but for pure performance, it's got to be a leap forward...

Avatar
Mike_Hall | 11 years ago
0 likes

Having used disc brakes extensively on and off-road all I can say is about bloody time.

Avatar
aslongasicycle | 11 years ago
0 likes

Sometimes as I lie in bed I build my ultimate Alpine descent bike. And this just made the grade. Here's to the new. (Soneone who's been using sodding rim brakes on road bikes for 27 years).

Avatar
andyspaceman replied to aslongasicycle | 11 years ago
0 likes
aslongasicycle wrote:

Sometimes as I lie in bed I build my ultimate Alpine descent bike. And this just made the grade. Here's to the new. (Soneone who's been using sodding rim brakes on road bikes for 27 years).

Come on then aslongasicycle, what's your current spec on that fantasy alpine descent bike? This sounds like a fun game.

As for disks on road bikes, I'm from a fat-tyred background so have been sold on the idea for years.

Avatar
Seoige | 11 years ago
0 likes

I really do not see the need for disc brakes on a road bike, particularly when it comes to weight. The only advantage I see is with carbon hoops.

Avatar
mustard | 11 years ago
0 likes

Lever bodies do still have a hint of the tombstone to them, but nowhere near as bad, aesthetically, as the SRAM versions. Oh, those cranks; how long?!

Avatar
Al__S | 11 years ago
0 likes

I'd quite like a low end version. I have BB7s on my drop handlebar commuter bike. I really wouldn't object to going hydraulic, but the "converter box" systems seem a bit daft to me.

Avatar
bikeandy61 | 11 years ago
0 likes

To me (as you have said in the article) it was always Shimano who would do this first (even though there were photos of SRAM kit late last year).

With all the mechanical gubbins of the gear shift ratchet mechanism taken out of the lever body on Di2 there was sure to be some way to get a hydro master cylinder and reservoir in to the lever.

Even so it'll be a few years before this trickles down to 105 level. But by then maybe I will have a job and be able to afford a new bike.

And I have to say while I'm not overly bothered about electronic shifting but have to say disk brakes are miles better in bad weather when I want better braking, than rim brakes.

Avatar
ubercurmudgeon | 11 years ago
0 likes

Excellent. This means there'll soon be lots of lightweight frames, forks, wheels, STIs and brakes available on eBay at knock-down prices when all the suckers who simply must have the latest thing, no matter how marginal or non-existent the gain, sell off their rim-brake-versions of everything.

Avatar
mikeprytherch replied to ubercurmudgeon | 11 years ago
0 likes

I will be one of these people, but you know what, marginal gains, I never heard so much shit in my life, anybody who has ridden a mountain bike knows full well that the brakes are amazing compared to the crap on road bikes, and you know what, road bikes go faster and actually need better brakes.

So mock all you want, but for me, anything which means I can stop faster... when say some twat in a car pulls out in front of me gets my vote and money every day over lets say saving 20 grams on a new carbon seat post.

Avatar
oak159 replied to mikeprytherch | 11 years ago
0 likes

I've never had a problem locking my wheels up with rim brakes. Seems to me there really is no problem with rim brakes and road bikes. I will give you this when it comes to rain. Rotors would be nice.

Avatar
mattsavage replied to oak159 | 11 years ago
0 likes

That's exactly the problem, locking up your wheel... Just cause you can lock it up easily doesn't mean they're good brakes. Good brakes offer consistency, modulation, and power. Disc brakes offer that far better than rim calipers.

Avatar
Welsh boy replied to mikeprytherch | 11 years ago
0 likes

Well said mikeprytherch. Spot-on analysis as far as i am concerned. I put off having disc brakes on my mountain bike on the argument that i had enough power to lock the wheel with V brakes, why would i want more. However, once i bit the bullet...wow, more control, better wet weather performance, no rim wear. Bring on road discs i say!

Avatar
gbzpto replied to mikeprytherch | 11 years ago
0 likes
mikeprytherch wrote:

I will be one of these people, but you know what, marginal gains, I never heard so much shit in my life, anybody who has ridden a mountain bike knows full well that the brakes are amazing compared to the crap on road bikes, and you know what, road bikes go faster and actually need better brakes.

So mock all you want, but for me, anything which means I can stop faster... when say some twat in a car pulls out in front of me gets my vote and money every day over lets say saving 20 grams on a new carbon seat post.

agreed !

Avatar
Seoige replied to gbzpto | 11 years ago
0 likes
gbzpto wrote:
mikeprytherch wrote:

I will be one of these people, but you know what, marginal gains, I never heard so much shit in my life, anybody who has ridden a mountain bike knows full well that the brakes are amazing compared to the crap on road bikes, and you know what, road bikes go faster and actually need better brakes.

So mock all you want, but for me, anything which means I can stop faster... when say some twat in a car pulls out in front of me gets my vote and money every day over lets say saving 20 grams on a new carbon seat post.

agreed !

Looool. We go faster Mike because we don't use the brakes so much  4 But money is an issue and can not be readily discounted. We both know when you buy a bike that is only the start of the costs. Just look at the cost of Shim D12 and campy eps. As an add on it is a bitch of a cost. Maybe if they can roll it out in the factory at marginal costs then a great idea, but retrospective fitting...how do you structurally attach it to a frame. Change is not such a bad thing but you can't also ignore physics. If you lock up your brakes whether caliper or disc...the tyres will break free (Newtons laws). In my humble opinion a good idea but also a marketing ploy to sell more bikes. And I can't see disc brakes being cheap and in the road bike world where weight is 'sacremont', a hard sell.  3

Avatar
dave atkinson replied to Seoige | 11 years ago
0 likes
Seoige wrote:

Looool. We go faster Mike because we don't use the brakes so much  4 But money is an issue and can not be readily discounted. We both know when you buy a bike that is only the start of the costs. Just look at the cost of Shim D12 and campy eps. As an add on it is a bitch of a cost. Maybe if they can roll it out in the factory at marginal costs then a great idea, but retrospective fitting...how do you structurally attach it to a frame. Change is not such a bad thing but you can't also ignore physics. If you lock up your brakes whether caliper or disc...the tyres will break free (Newtons laws). In my humble opinion a good idea but also a marketing ploy to sell more bikes. And I can't see disc brakes being cheap and in the road bike world where weight is 'sacremont', a hard sell.  3

we're not going to be retrofitting discs, they'll gradually become more popular on new bikes. OEM costs won't be so much of a hike.

the whole 'locking your wheel up' thing is a red herring. i can lock my wheel up by jamming my pump in the spokes. that doesn't make it as good a stopping solution as a disc brake.

disc brakes mean better modulation, less force at the lever for the same amount of braking power meaning easier braking and less fatigue, better performance in adverse conditions, less overall maintenance, no rim wear, even braking on out-of-true wheels and no aluminium paste all over your fingers when you change a flat.

the pros won't want them much, and can't have them anyway cause they're not approved. but for normal people they make an awful lot of sense for most types of riding.

hydraulics will be the top-end choice but i expect to see more and better mechanical units too. Hayes CX-5 and Avid BB-7 are good already, looking forward to the new Tektro Spyre...

Avatar
matthewn5 replied to ubercurmudgeon | 11 years ago
0 likes

Quite right ubercurmudgeon. I'm looking to get me a nice set of lightweight rim brake wheels off ebay as soon as these hit the shops. I did well picking up cheap Ultegra 6700 as soon as Di2 came out  3

Avatar
Sakurashinmachi replied to ubercurmudgeon | 11 years ago
0 likes

I've got a flat-bar with hydro discs and a carbon road bike with very expensive, very stiff long drop rim brakes - and there is simply no comparison. Finger-tip modulation with the hydros and grab and hope with the rim-brakes. As soon as I can (and before the next winter in any case) I'll be getting a disc-equipped road bike. Why don't you try some hydro discs before you knock them?

Avatar
Old CA Guy replied to ubercurmudgeon | 11 years ago
0 likes

Spot on, ubercurmudgeon!

Avatar
aslongasicycle | 11 years ago
0 likes

I'd turn Shimano for this kind of filthy lucre. Mmm.

Avatar
dwbeever replied to aslongasicycle | 11 years ago
0 likes
aslongasicycle wrote:

I'd turn Shimano for this kind of filthy lucre. Mmm.

Never. I'll never turn to the Dark Side. You've failed, your high-Di2-ness. I am a Campagi, like my father before me.

Latest Comments