A bottle cage is a bottle cage, right? Well, the Kinetic Twenty20 Cage is a bit different and has a nifty trick up its sleeve.
Which hand do you use to grab a water bottle when you're cycling along? You probably have a favoured side. For me, it's always with my left hand, so I can keep my stronger arm on the handlebar and stay close to the front brake in case I need to stop quickly.
Knowing that most cyclists probably have a favoured side, Kinetic obviously thought it would make sense to design a bottle cage that allowed a small range of adjustment to suit.
The cage has three mounting positions: the usual central position or with a 20-degree offset to the left or right, to make removing and replacing your bottle a little bit easier.
Does it work? Does it make it easier to extract and insert a bottle while cycling? Well, there's a small difference, but it's very subtle. With the cage offset, you certainly don't have to reach inside the front triangle quite as much, but it's not the game-changing difference I thought it might have been.
Where I found it made most difference is with smaller frames or where clearance is tight, such as on my mountain bike. Here the small offset makes it quite a bit easier to get at the bottle. It would also be useful for anyone fitting a bikepacking pack inside the front triangle, which eats into the available water bottle space.
The cage itself is very well made, and it's tough and durable. The edges are smoothly chamfered and don't scratch a water bottle. At 40g it's light and is available in four colours. And for a tenner, it's not bad value for money.
If you have a small frame size or limited space, this offset cage design does make your water bottle a little more accessible.
Useful for smaller frames where space is restricted, but for everyone else the offset cage design offers a limited advantage
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: Kinetic Twenty20 Cage
Size tested: 20° left/right
Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
Kinetic says: "The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left (fig. 1 in diagram), right (fig. 3) or centered (fig. 2) allowing bottle insertion into the center of the cage, rather than in from the side. They're great for small frames and mountain bikes too. Kinetic Twenty20 Bottle Cages are made of durable polycarbonate composite and weigh just 38 grams. Available in black, white, red and Kinetic Green."
Tell us some more about the technical aspects of the product?
The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right - allowing bottle insertion into the centre of the cage, rather than from the side.
A tenner is a reasonable price for a bottle cage.
Tell us how the product performed overall when used for its designed purpose
Works well and offers slight advantage compared to some bottle cage designs.
Tell us what you particularly liked about the product
Easy to use.
Tell us what you particularly disliked about the product
Offers minimal advantage over a regular bottle cage design on a road bike.
Did you enjoy using the product? Yes
Would you consider buying the product? Yes
Would you recommend the product to a friend? Yes
Use this box to explain your score
It's a well-designed bottle cage that's good value for money, and the offset option is useful in some applications and can make accessing your water bottle a little easier.
About the tester
I usually ride: My best bike is:
I've been riding for: 10-20 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: road racing, time trialling, cyclo-cross, commuting, touring, mountain biking
David has worked on the road.cc tech team since July 2012. Previously he was editor of Bikemagic.com and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds.