The Miche Neon Black on Black Wheels spin up quickly and hold their speed well, but they arrived out of true, which was a little disappointing.
The wheels are designed with the modern cyclist in mind, with the 17mm internal section meaning that you can run 25 or 28mm tyres if the mood catches you. I ran 25s which worked well. The wheels are also tubeless ready if you're that way inclined; I used inner tubes.
The front and rear have differing rim depths, the front at 26mm and the rear 29mm, which Miche claims improves performance.
With the low rim depth I found that crosswinds were not an issue, and the wheels held the road well throughout testing. That said, I was using these during a period of fine weather so didn't have the opportunity to really test these in high winds.
Miche claims to have improved the braking surfaces on these wheels and it seems to have worked as the braking performance is excellent. I used them in both dry and wet conditions and they offered a strong, quick grip from the pads.
Miche also claims it has reduced rim wear, which is great news for longevity but isn't something I can test during a short review period. The wheels do seem pretty bomb-proof and once I had trued the rear wheel they stayed true despite me taking them over some very rough surfaces, so the signs are good.
The fact that they arrived out of true is a bit annoying, though. It only took a few minutes with a spoke key to make it right, but it's not something you expect with a brand new set of wheels.
Miche has used Sapim spokes, 18 on the front and 24 on the rear. These are attached through drilled holes, meaning that they require rim tape or a strip. Miche includes rim strips with the wheels, but they're almost impossible to get on without breaking them. Once I'd managed to bodge them onto the rim they held in place well and covered every hole effectively.
The rear wheel uses a titanium and AL7075-T6 alloy freewheel body, which helps to keep the weight down and provide a solid base for decent power transfer. It seems to be high quality too, with no marks at all from hard accelerations and climbs – always an indication of durability.
Both wheels use oversized flanges made of a mixture of carbon and AL7075-T6, which not only helps with weight and allows for increased stability but also looks great alongside the black on black rim graphics.
Inside, Miche has used ultra-performance SKF bearings which spin up really well and allow the wheels to maintain their speed despite the relatively low rim depth. It's an impressive setup for this price.
When Miche launched the Neons, it did so boasting of their weight: a set of mid-range alloy wheels that were lighter than its top-of-the-range lines. They hit the scales at 1,598g for the pair – 688g for the front and 910g for the rear. That's a decent weight for wheels in this price range, considering their durability and stability, but not the lightest for the money. One of their main rivals is the Fulcrum Racing 3 C17; the Miches come in 3g lighter, which isn't much, but given that they can run tubeless, for £15 less, that's pretty good. However, against the Mavic Ksyrium Elites, which are £10 more – which includes tyres – they are about 80g heavier than Mavic's claimed weight.
Overall, I like these wheels. They spin up well, hold their speed, and you can put the power down nicely. However, for a pair of wheels sold on being lightweight, they aren't bad but aren't as light as some of their direct competitors, and receiving a new pair of wheels that are out of true is pretty annoying.
Durable and well-specced wheels that spin up well and hold their speed, if not as 'lightweight' as Miche suggests
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
road.cc test report
Make and model: Miche Neon Black on Black Wheels
Size tested: 700C, rim brake
Tell us what the wheel is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?
A pair of wheels designed to be lightweight and high enough quality to be used for racing or training.
Miche says, "The objective of creating a lighter wheelset to our current top of the range alloy clinchers, the Miche Syntium AXY has not been an easy task. We have tried to maintain the same level of strength and rigidity whilst at the same time reducing the weight.
"As we have often found, a lighter wheel does not necessarily mean a faster wheel!
"Tested and developed in the Miche Engineering Lab, where we have tested the wheels rigidity and power transfer ability, this together with lifecycle testing on our rolling road, to meet our goal, to build a wheelset that performs fantastically, yet is also ultra-reliable.
"The rim width now matches the current trend for wider rims / tyres being 17mm internal section, ideal for 25c or 28mm clincher tyres. The rear rim is skilfully tuned to improve its performance with the use of a taller depth than the front rim along with an asymmetric profile.
"The wheels are assembled using double-butted straight pull spokes with dedicated spokes patterns: 18 spokes radial for the front, 24 rear crossed on the drive side and radial for the non-drive side. Nipples are in Ergal for maximum lightness, spokes as with all Miche wheels, are custom-made by Sapim to Miche's innovative design.
"The Miche Supertype hubs for rim brake models feature oversize flanges built from a combination of carbon and AL7075-T6, excellent smoothness and long bearing life is assured thanks to the use of Miche specific ultra-performance SKF bearings.
"Exclusive materials are used for the freewheel body, which ls made of titanium and AL7075-T6 alloy. Freehub bodies are available, compatible with Shimano, Campagnolo and SRAM gear systems.
"The new Miche Neon wheels excel over mixed or mountain terrain, when the road rises, they will boost your performance."
I'd say Miche has generally succeeded in this task, with the wheels being fairly light and definitely strong and rigid.
Tell us some more about the technical aspects of the wheel?
Miche Neon Alloy Clincher: 1545g
All weights + / - 3% manufacturing tolerance
Exclude wheel quick release (QR)
Hub Bodies available for;
Campagnolo CA 9-10-11 speed
Shimnao SH 9-10-11 speed
SRAM 10-11 speed (same hub body as Shimano)
Miche Neon Alloy Clincher: 18 Front - 24 Rear
Miche use exclusively SAPIM spokes, made to our custom specification in all our wheels. All custom machined and finished in our factory. Alloy 7075 T6 nipples.
Very well made, but they arrived out of true; once trued they stayed in shape well throughout the review.
Performed well throughout the review, spinning up well and holding their speed.
Seemed to take everything in their stride, including the roughest roads I could find.
Our test wheels came in a bit heavier than the claimed weight of 1,545g, but 1,598g is still a decent weight for the price, if not hugely (or at all) lighter than their competitors.
They compare well with the Fulcrum Racing 3 C17s, which are £15 more and around the same weight, but the Miches give you the option to run tubeless; the Mavic Ksyrium Elites are £10 more (which includes tyres) and about 80g lighter.
Did the wheels stay true? Any issues with spoke tension?
Once trued they were fine, but they turned up out of true which is not a great start.
How easy did you find it to fit tyres?
Very easy, and once they were on they held the rim impressively well.
How did the wheel extras (eg skewers and rim tape) perform?
The skewers worked well and have a nice industrial design. The rim strips that were included worked well once they were on the wheels, but getting them there was almost impossible to do while keeping them in one piece.
Tell us how the wheel performed overall when used for its designed purpose
They performed well: they hold their speed, are light enough to make them decent options when going upwards, and create a solid base for power transfer.
Tell us what you particularly liked about the wheel
Sounds superficial, but probably their looks – the blacked-out graphics and carbon outer on the hubs look great.
Tell us what you particularly disliked about the wheel
They arrived out of true.
Did you enjoy using the wheel? Yes
Would you consider buying the wheel? Maybe
Would you recommend the wheel to a friend? Maybe
Use this box to explain your overall score
They are a good set of wheels, but arriving out of true wasn't the greatest of starts, and for wheels that are described as 'lightweight' they could be lighter. That said, they perform well, they hold their speed impressively for low profile wheels, and they look good.
About the tester
I usually ride: Cinelli Gazzetta My best bike is: Cannondale Supersix Evo
I've been riding for: Under 5 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: commuting, club rides, sportives, general fitness riding, fixed/singlespeed, mountain biking
George spends his days helping companies deal with their cycling commuting challenges with his company Cycling for Work. He has been writing for Road.cc since 2014.
When he is not writing about cycling, he is either out on his bike cursing not living in the countryside or boring anybody who will listen about the latest pro peloton/cycling tech/cycling infrastructure projects.