Like this site? Help us to make it better.


Updated: New aero wheels from 3T

Italian brand takes on Zipp with carbon wind cheaters

3T is launching an innovative new range of aero wheels to take on the likes of Zipp at the top end of the market. The Italian brand, which is celebrating its 50th birthday this year, will first release Mercurio tubulars to be followed by Accelero clinchers in the next few months.

At the media launch outside Turin just ahead of the start of the Giro, 3T technical director Richard McAinsh said that the new wheels equal or exceed the best currently available in terms of aerodynamics, weight, inertia, strength stiffness and braking.

3T reckon that the aerodynamics of Zipp’s Firecrest rim shape are exceptionally good at certain yaw angles but that the amount of drag changes a lot according to the apparent angle of the wind. They claim their new design has consistently low drag through the range of yaw angles you’ll encounter in real world riding. As well as keeping you moving fast, 3T say this consistency reduces sudden changes in pressures on the wheels caused by the wind’s veering in direction, thereby improving stability. We've been to the presentation not ridden them, so we can't comment on that one.

In terms of weight, the Mercurio Ltd 60 wheelset (with 60mm deep rims) comes in at under 1,400g, which is up there (or down there, depending on how you look at it) with the best.

3T have worked hard on keeping as much of that weight as possible close to the centre of the wheel to reduce inertia and so improve acceleration (think about an ice skater spinning; when they bring their arms in closer to their body they spin faster). The composite rims have been made to weigh less than 400g (60mm version again) and the spokes have been reversed so the nipples – the heaviest bits of the spokes – are positioned at the hubs rather than at the rims.

3T didn’t want to drill their rims on the basis that drillings are stress risers and require extra rim-wall thickness for reinforcement, increasing weight. Instead, the spoke heads slot into little pockets in the rims that are strengthened using fibres as bridge sections – they work a bit like the cables on a suspension bridge. The spokes exit the rim on one side and cross over to the opposite hub flange.

The obvious concern is whether those open pockets mess up the aerodynamics. Independent testing at the San Diego wind tunnel apparently says not, which came as a surprise to the researchers.

The hubs are exclusive to 3T, the rear one coming with a notably tall flange on the drive side to give a wider bracing angle to the crossover spokes. The spokes are perfectly straight so they can reliably support high tension and the nipples look easy enough to get to so adjustment shouldn’t be too much trouble.

One other interesting feature is that the freehub body is compatible with Shimano/SRAM and Campagnolo. The splines fit both standards. If it works as promised, we hope 3T license the design out.

3T have given the brake tracks a ‘surfacing veil’ that’s derived from Formula 1 – Richard McAinsh was formerly head of composites at the Ferrari F1 team. They’re not giving a great deal away about what that is although they reckon it’s highly resistant to abrasion.

In tests by braking gurus Swiss Stop, the 3T wheels performed impressively in both when dry and when wet. The friction isn’t as high in wet conditions, obviously, but it’s not too far off and, just as important, it’s consistent so you know what you’re getting. Plus, even at 200°C, there was no deformation of the brake pads or deterioration of the braking area.

The 3T Mercurio 60 tubulars will be released in October (although we don’t have a date for availability in the UK) at a price of €2,100 (no UK price has yet been released). The Mercurios will soon be available in 40 and 80mm depths too.

The clincher version, the Accelero, will come in 40 and 60mm clincher versions next year. The Accelero will be available in a Ltd model with carbon-composite rims and a Team model with hybrid alloy/carbon rims. The 40mm version will also come in a Pro model with alloy rims, and there will be another Pro model with 47mm rims.

The Team versions are likely to cost €1,000 to €2,000, and Pro versions from €500 to €1,000 although these prices are not confirmed.

For more info on 3T go to, although details on these wheels aren't yet up.

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Latest Comments