Like this site? Help us to make it better.


Garmin unveils updated Vector 2 pedal-based power meters

Updated Vector 2 and Vector 2S power meters easier to install and feature status LEDs. Cost from £749.99

Hot on the heels of its new Virb X action camera earlier this week, GPS specialist Garmin has unveiled two new Vector 2 and Vector 2S pedal-based power meters, which are easier to install than the original Vector.

Like the original Vector power meter, the two new Vector 2 power meters measure power at the pedal and feature a redesigned pedal pod that Garmin claims is easier to install and transfer between different bikes. The new pedal pods also incorporate status LED lights for displaying setup and maintenance information.

Vector 2 is a dual-sided power meter that offers left and right power information, and can display detailed data about the efficiency of your pedal stroke, so you could for example identify where force is being applied during the pedal revolution. The more affordable Vector 2S is a single-side left crank arm and measures deflection in the pedal spindle and is factory calibrated to determine total power. Vector 2S can be upgraded to Vector 2.

“The introduction of Vector and Vector S changed the way power was measured, and made power metrics accessible to cyclists of all levels,” said Andrew Silver, Garmin EMEA Product Manager, Fitness. “Vector 2 and Vector 2S add valuable new features and improve key components to take this to the next level. By redesigning the pedal pod and eliminating the need for washers to address recessed crank faces, adding LED light displays and offering the most advanced metrics for training, it’s easier than ever for cyclists to install, maintain, upgrade and track power for a better ride.”

The new Vector 2 uses no washers, it’s simply a case of fitting the pedal as you would any regular pedal. It’ll work with most crank arm designs including carbon fibre cranks. The pedal pod is installed after the pedal is fitted to the crank arm. Washers can still be fitted to modify the q factor if necessary. As with the original Vector system, the new Vector 2 uses ANT+ to communicate with compatible cycling computers, like Garmin’s own Edge and Forerunner models.

Weight for the Vector 2 pedal is 156g and 23g for the pedal pod. Both Vector systems use Look Keo cleats. The battery life is a claimed 175 hours from a replaceable CR2032.

Vector 2 will cost £1,199 and Vector 2S £749.99, and the optional Vector 2S right-side upgrade pedal will be available for £549.99. Both power meters will be available this spring. Both models are available in Standard to fit cranks that at 12-15mm thick and Large to fit cranks 15-18mm thick.

More at

David worked on the tech team from 2012-2020. Previously he was editor of and before that staff writer at RCUK. He's a seasoned cyclist of all disciplines, from road to mountain biking, touring to cyclo-cross, he only wishes he had time to ride them all. He's mildly competitive, though he'll never admit it, and is a frequent road racer but is too lazy to do really well. He currently resides in the Cotswolds, and you can now find him over on his own YouTube channel David Arthur - Just Ride Bikes

Add new comment


Dante256 | 8 years ago

I've just released an in depth review of the new Vector 2 system, converting a lot of comparisons between the first Generation and the latest second generation Vector 2 pedals, if people are interested to see how the changes have worked out in the real world

Vili Er | 9 years ago

So it's now black and has lights for people who can't read the manual/watch the really good installation videos or work a torque wrench properly. Looking forward to the V1 price reductions so I can upgrade from S to both pedals.

David Fischer | 9 years ago

I were hoping for a Speedplay Zero version, but guess I will have to jump on the Rotor INpower solution instead...

Latest Comments