Like this site? Help us to make it better.


Tour de France Tech 2015: Chris Froome’s Pinarello Bolide

The bike that Team Sky's Chris Froome will ride in Utrecht at the start of his quest for Tour de France glory

This is the Pinarello Bolide bike that Chris Froome will ride in the time trail that opens this year’s Tour de France.

Pinarello launched the Bolide two years ago and Froome used it en route to winning the 2013 Tour. Sir Bradley Wiggins also rode a track version of the Bolide to the World Hour Record last month

As you’d expect, the frame uses airfoil tube sections to reduce drag and, in certain wind conditions, provide for forward force (thrust).

The seat tube is designed to improve the airflow towards the rear of the bike, wrapping around the leading edge of the rear wheel.

The front brake is integrated into the fork to reduce aerodynamic resistance, and although it’s positioned in a conventional position on the seatstays, the rear brake is shrouded so as not to disturb the flow of air.

The battery for the Shimano Dura-Ace Di2 electronic shifting is hidden away inside the frame and the wires, along with the brake cables, run internally.

Froome can change gear both from the ends of the aero bar extensions when he’s in his usual seated riding position, and from the ends of the base bar when he’s riding out of the saddle. That’s a K-Edge computer mount on the righthand extension, by the way.

You can get a Shimano Di2 system where one bar-end shifter controls the front mech and the other one controls the rear mech. Each shifter is equipped with two buttons: one of them moves the mech in one direction, the other moves it in the other direction.

However, Froome goes with a system that uses just one button per shifter. The left shifter moves the rear mech in one direction, the right shifter moves it the other way. If he wants to move the front mech he needs to use buttons on the base bar.

The aero bar, including the buttons that control the Di2 from the base bar, are Pinarello’s own design.

Grip tape at the ends of the base bar avoids hands slipping.

That aero bar incorporates a stem and flows directly into the frame’s top tube so as not to increase the bike’s overall frontal area.

The forearm rests don’t look the most polished design ever. In fact, they look a bit… budget. We’re guessing they work just fine though.

The Bolide is built with a tapered head tube (1 1/8in at the top, 1 1/4in at the bottom), asymmetric chainstays (the driveside one is built beefier to handle the powers associated with transferring power to the rear wheel), and an oversized BB86 bottom bracket.

Froome uses O.Symetric non-round (they’re twin cam rather than oval or elliptical) chainrings mounted to an old-style five-arm Dura-Ace crank. The transition from the spider arms to the outer chainring isn’t nearly as smooth as it is with a standard set-up. It’s functional rather than pretty!

O.Symetric rings are designed to allow you to achieve more power by increasing the size of the gear when your legs are in the strongest part of the pedal stroke and reducing the size of the gear through the weakest part of the pedal stroke. Froome obviously believes they offer a benefit.

Chainrings aside, the groupset components are Shimano Dura-Ace Di2 throughout and the wheels come from Pro, Shimano’s sub-brand. Froome uses a three-spoke front wheel while the rear wheel is a Textreme carbon disc. The two faint circles on the disc wheel have been caused by the rear mech rubbing slightly when using the largest sprocket.

The tyres are Continental Competition Pro Ltd tubulars. These are 22mm wide and they live up to their name by being only available to pro riders.

The saddle is a Fizik Tritone 5.5 Braided with a carbon-reinforced nylon shell and carbon rails. As is usually the case with time trial/triathlon-specific saddles, it’s noseless for comfort when riding in an aero position.

We spotted that Froome had picked up a bit of extra weight on his most recent training ride. That’s a dead bee lodged in there between the limit screws on the rear mech. Or maybe it was just resting. Either way, the mechanics will have it out of there and the bike sparkling before it gets anywhere near the start ramp.

By the way, this is the full-bike photo we decided not to use on the basis that it looks like there’s an Oompa Loompa standing on the rear wheel. As far as we know, Team Sky hasn't started employing Oompa Loompas. Yet. If there were any marginal gains to be had through it, though, it might be a different story.

For more info go to

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment


shay cycles | 8 years ago

So the rear wheel is a glorified version of the plastic or metal disc fitted to cheaper bikes to prevent over-shifting back when I started cycling in the 70s ....

Who'd have thought all the electronics and technology would have brought us so far?

offshore_dave | 8 years ago

It all looks a bit scabby!

Good luck anyway, Chris.

Looking forward to it all kicking off.

recurs | 8 years ago

there's something about the construction of this bike that makes me think it's a Chinese knock-off of a Pinarello.

Sub4 | 8 years ago

Where the rear mech rubs against the disc in the biggest sprocket???

I love my bike replied to Sub4 | 8 years ago

I assume a bit of work fileing down the pulley mount bolt might have been in order, but it's a bit late now!

2 Wheeled Idiot | 8 years ago

Those extensions are certainly wacky....maybe similar to the 3d printed ones that Wiggins used, just without the grips and 22.2mm hollows for the shifters

Latest Comments