Support road.cc

Like this site? Help us to make it better.

news

Car tyres to be recycled for surfacing footways and cycle paths? Trial to get underway in Sweden

Surface is said to provide 80 per cent better shock absorption than existing materials

Researchers are set to trial rubber surfaces made out of recycled car tyres for footways and cycle paths in two cities in Sweden – and say that the shock-absorbing properties of the material can help prevent serious injury and even death.

The initiative, which is led by RISE Research Institutes of Sweden, is designed primarily to help prevent injury to elderly people, who are more prone to falls, are more likely to suffer fractures if they do, and who take longer to recover, reports The Times.

By providing safer surfaces for cyclists and pedestrians – it is claimed to provide an 80 per cent improvement in absorption levels than existing surfaces – it is also hoped that people would be encouraged to be more active, bringing additional health benefits.

A two-week, EU-funded trial of the concept, which sees granules of recycled tyre make up 60 per cent of the surfacing mix, the remainder being made up of rocks and bitumen, will get under way in the Swedish cities of Lund and Helsingborg in two weeks’ time, with 300 metres of cycle paths and footways being treated with the new surface.

Dr Viveca Wallqvist of RISE, speaking in Seattle at the American Association for the Advancement of Science’s conference, said: “Thousands of lives could be saved by this pavement surface, both in the UK and other countries.

“That is because people are less likely to break their hip and die if they fall on this surface and would also be more likely to go out and do healthy activities like walking and cycling if they no longer have to worry about the risk of a fall.

“My father was told he would have to go out in a wheelchair because of the risk of falling – his freedom was taken away because of it," she continued.

“Falls are a major hazard to older people so anything we can do to lessen the severity of the injuries they cause is definitely worth exploring.

“If this new idea works it could be one element of a broader strategy on falls – which also needs to include more strength and balance training for older people, which has already been shown to make a positive impact,” she added.

The NHS says that almost 100,000 people in the UK aged 65+ fracture their hip annually, mostly caused by falls, which are also the most common factor in injury-related deaths among those aged 75+ claiming 5,000 lives a year.

According to researchers, the surface would cost no more than existing road surfaced, and would also save money for health services due to fewer injuries.

Previously, RISE has also explored using recycled rubber from tyres as an alternative fuel source for vehicles.

As journalist Carlton Reid – author of the book, Roads Were Not Built For Carspoints out in this article for Forbes, rubber road surfaces are nothing new.

He highlights that prior to asphalt becoming the surface of choice for roads and footways during the 1920s, other materials – wood, cork and, yes, rubber – were used.

Reid cites Henry Percy Boulnois, who was city surveyor of Exeter and Liverpool, as writing in his Municipal and Sanitary Engineer’s Handbook, published in 1892, that a layer of India rubber one-inch thick “meets nearly all the requirements of a perfect roadway.”

Referring to just such a surface at the entrance to Euston Station, Boulnois wrote that the rubber sheets were “held down at their sides upon a concrete foundation by strips of iron which clasp the edges tight on each side.”

The material, he said, “Seems to be exceedingly durable, perfectly safe, and absolutely noiseless and impervious.”          

Simon joined road.cc as news editor in 2009 and is now the site’s community editor, acting as a link between the team producing the content and our readers. A law and languages graduate, published translator and former retail analyst, he has reported on issues as diverse as cycling-related court cases, anti-doping investigations, the latest developments in the bike industry and the sport’s biggest races. Now back in London full-time after 15 years living in Oxford and Cambridge, he loves cycling along the Thames but misses having his former riding buddy, Elodie the miniature schnauzer, in the basket in front of him.

Add new comment

5 comments

Avatar
danhopgood | 4 years ago
0 likes

According to Friends of the earth there;s currently 19000 tonnes of moicroplastics going into the rivers every year just in the Uk from tyres wearing and the bits getting flushed away.  If we don't dispose of the old tyres but go and have them exposed to the weather, many times more microplastics will end up in the rivers.    Not so environmentally friendly...

Avatar
Triblokerich | 4 years ago
1 like

Testing must be done to check it is not more slippery than tarmac in wet and icy conditions as well as extreme heat, both for bikes and all composite shoe soles. Also, how long does it take to degrade and what does that degradation look like (eg crumbly surface or deep potholes).

If it's seen to be safe both short and long term, and can stand up to British weather over a period of time then this looks a good idea

Avatar
ktache replied to Triblokerich | 4 years ago
1 like

If it is going to be used on pavements it will have to be able to withstand being driven over by very heavy motor vehicles.  No matter how much they are forbidden, they will do it if they can.

If it is soft enoungh to protect from inpact during falls it will very draggy, not just for bicycle tyres but also for wheelchairs and other mobility aids.  I did have a short ride on a running track at a charity event (before I was quickly told not to) and you could really feel it.

Avatar
OldRidgeback replied to Triblokerich | 4 years ago
0 likes

Triblokerich wrote:

Testing must be done to check it is not more slippery than tarmac in wet and icy conditions as well as extreme heat, both for bikes and all composite shoe soles. Also, how long does it take to degrade and what does that degradation look like (eg crumbly surface or deep potholes). If it's seen to be safe both short and long term, and can stand up to British weather over a period of time then this looks a good idea

I've run on running tracks with ruber surfaces a few times. They're pretty good underfoot. But they're not that durable. Using a semi-porous design can reduce water build up.

My feeling is that the best option is to use a porous asphalt grade that contains a high crumb rubber percentage in the mix. With that, you get water dispersion, resistance to poor weather, good skid resistance properties and overall durability as well as longevity.

Avatar
OldRidgeback | 4 years ago
1 like

Asphalt containing crumb rubber from old vehicle tyres has been used for years. It's nothing new. It's been used a lot in the western US states, New Mexico and Arizona in particular. It's a cheap additive that helps lower the overall cost/tonne of asphalt, improves skid resistance, reduces road noise and makes the surface more resistant to cracking. This is now being tested in the UK to see if it stands up to our climate.

Crumb rubber surfaces from waste tyres are also not unknown and used in industrial applications.

Latest Comments