Like this site? Help us to make it better.

Polaris RBS Windgrip Gloves



Bright and warm for a decent price, the lack of padding might be an issue for some though.

At every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

Polaris' Vortex Windgrip gloves have had a bit of an RBS makeover — that's Really Bright Stuff to you and me. They certainly stand out in low light conditions. They're warm too though you might want to beef up your bar tape.

Filling that middle ground between summer mitts and full on winter gloves the Windgrips use a fleece backed polyamide/polyester mix for the main body to keep the wind out and trap warmth while still keeping the overall bulk down. It's good to see a fleecy snot wipe too, something that is often missing on this style of glove.

The palm is purely polyester covered in silicone Polaris logos which grip your bar tape even when it's wet. It's thin though with no padding whatsoever so if you suffer from numbness around the ulnar nerve for example you might struggle with these.

The fit is close without being tight which is good for warmth, you need a bit of space to trap warm air and at 22.5cm circumference I fit nicely inside these size large gloves (22-24cm) though if you have long fingers you might want to go up a size. My fingers are quite short and wide (sausage fingers according to my kids) and I was very close to end of the gloves.

The cuff comes about an inch past the wrist so will fit nicely under a jersey sleeve without any flesh being left exposed.

As far as warmth is concerned I found them most effective between 7 and 15°C and I'd say I have a reasonable resistance to cold fingers. They are comfortable, giving you plenty of dexterity plus you don't have to take them off to use your smartphone screen.

If you do get caught out in the rain they hold on to heat well when wet thanks to that fleece lining and they'll also dry quickly.

As far as the price goes they are on par with other gloves of this style that we've tested. They look well put together with a nice fit and are comfortable for long rides provided you can ride without padding.

The fluoro yellow colour stands out at dawn or dusk for signalling your intentions known to following drivers.

Overall then they are comfortable, fit well and keep your hands warm in autumn and spring temperatures plus help out on the visibility front. Check for finger length though.


Bright and warm for a decent price, the lack of padding might be an issue for some though.

If you're thinking of buying this product using a cashback deal why not use the Top Cashback page and get some top cashback while helping to support your favourite independent cycling website test report

Make and model: Polaris RBS Windgrip Glove

Size tested: Large

Tell us what the product is for, and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

These are windproof gloves which are ideal for the temperatures we see in spring and autumn, mid single figures to the mid teens. They've been given Polaris' Really Bright Stuff treatment meaning the hi-viz yellow highlights your signalling in low light conditions.

Tell us some more about the technical aspects of the product?

Polyester/Polyamide body

Polyester palm

Silicone grips

Snot wipe

Rate the product for quality of construction:

Tidy stitching and finish.

Rate the product for performance:

Good windproofing and fit though the lack of padding won't be for everyone.

Rate the product for durability:

Polyamide is renowned for its durability so these should stand up to general wear and tear well.

Rate the product for weight, if applicable:

lightweight and easily stowable in a jersey pocket.

Rate the product for comfort, if applicable:

A good fit though agin that thin pad requires some decent bar tape.

Rate the product for value:

On par we've others we've tested and I'd happily pay the rrp for the fit and performance.

Tell us how the product performed overall when used for its designed purpose

They are great in the wind and highly visible in low light conditions.

Tell us what you particularly liked about the product

The fit is good and a good amount of dexterity.

Tell us what you particularly disliked about the product

They worked for me but short fingers and unpadded palm might effect others.

Did you enjoy using the product? Yes.

Would you consider buying the product? Yes.

Would you recommend the product to a friend? Yes.

Anything further to say about the product in conclusion?

They do the job that they are designed to do well covering a decent temperature range and plenty of comfort. Like I've said in the review though they could probably do with a small amount of padding to provide the full package.

Overall rating: 7/10

About the tester

Age: 36  Height: 180cm  Weight: 76kg

I usually ride: Kinesis T2  My best bike is: Kinesis Aithien

I've been riding for: 10-20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed,


With 20 years of road cycling and over 150,000 miles in his legs it's safe to say Stu is happiest when on the bike whatever the weather. Since writing his first review for back in 2009 he has also had a career in engineering including 3D-CAD design and product development, so has a real passion for all of the latest technology coming through in the industry but is also a sucker for a classic steel frame, skinny tyres, rim brakes and a damn good paintjob.
His fascination with gravel bikes is getting out of control too!

Latest Comments