Support road.cc

Like this site? Help us to make it better.

review

Standert Kreissäge RS

7
£5,490.00

VERDICT:

7
10
All the stiffness needed for a race machine, but the ride quality isn't the best for UK roads
Stiff frame & fork offer great performance
Big choice of eye-catching paintjobs
Classic looks
Firm ride highlighted by poor road surfaces
Welds aren't the smoothest for this money
Weight: 
8,220g
Contact: 

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

If, like me, you love the aesthetics of a traditional race bike then the Standert Kreissäge RS could definitely be the bike for you. Bang up to date with integrated hose runs and electronic gear cabling, thru-axles and hydraulic disc brakes, the RS has everything the performance rider needs while exploiting the benefits of modern alloy tubing. All of this doesn't come cheap, mind, but this is no mass-produced scandium alloy frame.

> Buy now: Standert Kreissäge RS for €6,599 from Standert

Check out our guide to the best aluminium road bikes for more options in metal…

Standert Kreissäge RS: Ride

If you've been reading our bike reviews any time over the last 15 years you'll probably know that I'm a big fan of metal bikes (I've just bought my second ever carbon frame – 14 years after I sold my first one), so to get offered the chance to review the Kreissäge RS filled me with a lot of joy. Especially as it uses scandium aluminium tubing, which isn't something we see that often, and it certainly helps on the performance front.

2024 Standert Kreissäge RS - riding 4.jpg

The RS is a race bike, described by Standert as one to "go fast, brake late, hit the apex, accelerate out of turns and sprint for whatever you are sprinting for". So, I knew stiffness was going to be high on the agenda, and it certainly is. This is the kind of bike you ride if comfort is a secondary consideration, and a KOM means more to you than arriving back home with some feeling left in your contact points... and to be honest, that is a bit of me.

I will say, though, that this is one of the most unforgiving aluminium alloy bikes I've ever ridden, and I've owned and ridden more than most people.

2024 Standert Kreissäge RS - riding 5.jpg

For reference, I've owned a Cannondale CAAD 8 and CAAD 10, an original Kinesis Aithien, a Kinesis T2, Focus Izalco and a Mason Definition, and I've ridden loads of others from the likes of Specialized's Allez range, Trek and so on.

A lot of them were no slouches when it came to performance either, so it's not like the stiffness here is throwing a spanner in the works. If you spend a lot of time on main roads with a decent smooth surface things aren't too bad, but move away from those and the slightest ripple is very noticeable, and high-frequency buzz can get a touch annoying.

Feedback from the tyres isn't sacrificed too much, though, and the Kreissäge RS has a refined feel to it, maintaining a good relationship between bike and rider.

It certainly feels agile, and responsive, too, especially when hammering the pedals hard while out of the saddle, easily competing with carbon fibre frames of a similar price. The only place where the RS isn't quite so competitive against them is weight.

2024 Standert Kreissäge RS - riding 1.jpg

Scandium – a rare-earth metal – is generally added to an aluminium alloy mix to increase strength, or to achieve the same strength as an aluminium alloy frame but at a lower weight, though the amount of scandium actually added is very small. In this Ultegra Di2 build with deep-section carbon wheels, we're talking 8.22kg on our scales, which is more than 600g heavier than something like Argon 18's carbon Sum that I reviewed a few months back, which has a similar build spec and price.

Another aluminium race bike I've reviewed was the relatively budget-friendly Sonder Prima Al, which cost half the price of the Standert, weighed 8.79kg with Shimano 105 Di2, entry-level finishing kit and some very heavy own brand wheels which weighed over 2kg! Switch those out for wheels similar to the weight of the DT Swiss set found on the RS and you'll be saving close to 600g, so the same overall weight roughly, while saving a lot of cash.

This means the Standert doesn't feel superlight on the climbs. It's no slouch, but it's noticeable if you are used to riding lighter carbon race bikes. Everywhere else, though, the RS feels nimble enough and thanks to the geometry, with its relatively steep angles and short wheelbase, the RS changes direction quickly and positively.

2024 Standert Kreissäge RS - riding 3.jpg

The short head tube allowed me a long and low position whether on the hoods or drops, which makes the whole experience of riding the RS feel rewarding.

2024 Standert Kreissäge RS - riding 2.jpg

In fact, when riding hard you can feel how well suited the Kreissäge would be to something like criterium racing. The fork is stiff, so hard braking efforts and throwing the bike into tight corners doesn't unsettle the front end, while the tight, stiff lower half of the frame means that when you hammer the pedals to pull yourself out of the bend the RS just feels planted and efficient.

Standert Kreissäge RS: Frame & fork

The Kreissäge RS is built in Italy from custom scandium tubing manufactured by Dedacciai. Compared with a traditional round tubed frame, you can see subtle tweaks to the tube profiles as they travel from A to B, optimising performance depending on where they sit on the bike.

2024 Standert Kreissäge RS - downtube detail 2.jpg

Probably one of the most noticeable things is that Standert hasn't gone down the route of dropping the seatstays, something that is commonly done to improve aerodynamics. I like the traditional look, though, and aero isn't really what the RS is all about.

For this sort of money I wasn't overly enamoured by the quality of finish of the welding. The benchmark for me when it comes to the finish on metal frames is that offered by Mason Cycles; on its aluminium alloy Definition the welds are finished to a smooth and very high standard, and the Kreissäge doesn't quite match that attention to detail.

Like the Mason, Standert hasn't sanded the joins at all for a smoother finish, leaving all of the integrity of the original weld, which is a bonus.

2024 Standert Kreissäge RS - UCI sticker.jpg

It is better than cheaper options, though, such as the current Cannondale CAAD13, whose welding is, shall we say, somewhat agricultural, as can also be said for the Specialized Allez Sprint. Between those and the Mason, the Standert hits the middle ground.

2024 Standert Kreissäge RS - seat junction.jpg

The Kreissäge RS is available in a stunning line-up of eight colours, which go a long way to hiding those welds. The paint on this bike looks deep and glossy, although, while I like the gold decals, I personally think the pink clashes a bit.

2024 Standert Kreissäge RS - head tube badge.jpg

Standert has specced a T47 bottom bracket for the Kreissäge RS, which I was pleased to see as it blends the performance of larger diameter press-fit systems with the reliability of threaded BSA setups.

2024 Standert Kreissäge RS - bottom backet.jpg

At the time of ordering you can upgrade things like the headset and bottom bracket to ceramic bearings, and even chain waxing is offered.

2024 Standert Kreissäge RS - fork detail.jpg

The CNC machined rear dropouts will accept a UDH rear mech hanger – a universal derailleur hanger. Should you crash and damage it, you won't need to source a model-specific hanger, so the chance of picking one up in a local bike shop massively increases.

2024 Standert Kreissäge RS - rear dropout 1.jpg

Tyre clearance is a decent 30mm, and you can run up to 160mm diameter rotors front and rear.

2024 Standert Kreissäge RS - rear disc brake.jpg

Standert offers the Kreissäge RS in seven sizes ranging from 48cm to 60cm. I had the 56cm, which comes with a 555mm top tube and 145mm head tube. The head and seat angles are both 73.5 degrees, while the stack and reach figures are 560mm and 390mm respectively.

2024 Standert Kreissäge RS - rear.jpg

The chainstays are 410mm in length, the wheelbase 986mm in total.

Standert Kreissäge RS: Finishing kit

As I mentioned above, the Kreissäge RS is available in a choice of eight colours, and after you've chosen your frame size you can spec your build from a range of options. For groupsets it's electronic only, and your choices are Shimano 105, Ultegra and Dura-Ace Di2 and SRAM Force or Red AXS.

2024 Standert Kreissäge RS - lever.jpg

Our build uses Ultegra Di2 which is a great groupset in pretty much every aspect. For the full lowdown on everything from gear shifting performance to braking you can check out our separate review. As usual, it performed faultlessly and the braking remains constant and powerful whatever the weather.

2024 Standert Kreissäge RS - front disc brake.jpg

The customisation doesn't run to crankset or cassette choice on Standert's website, but the 52/36T and 11-30T 12-speed is a good choice for fast riding.

2024 Standert Kreissäge RS - drivetrain.jpg

The cockpit is taken care of by Deda with its Superbox DCR stem, which is designed to run the brake hoses into the frame and fork via the top of the head tube. Compared with some designs out there that do the same job it is quite understated and suits the aesthetics of the frame.

2024 Standert Kreissäge RS - stem.jpg

Deda's SuperZero RS carbon handlebar has a wing shape to the tops and provides plenty of comfortable hand positions, while its stiffness matches that of the frame. It's ideal for hard sprinting efforts.

2024 Standert Kreissäge RS - bars top.jpg

For both of these components you can choose what size you want.

2024 Standert Kreissäge RS - bars 3.jpg

You can also choose which saddle you would like – well, from two options: the Fizik Vento Argo R1 or the Argo R1 Adaptive. The latter adds €100 to the price. I'm a big fan of Fizik's saddles, and I've used both of these and found them comfortable and supportive.

2024 Standert Kreissäge RS - saddle.jpg

Again, there are more options available for the wheels and tyres. For wheels it's a choice of DT Swiss ARC 1100 or ARC 1400 sets, or the Artech 4 or 6 from Scope.

This build has the ARC 1400s in a 50mm depth, and a very nice set of wheels it is too. I've recently reviewed the 38mm versions and pretty much everything I've said there is true of these slightly deeper ones. Their low weight helps boost the performance of the RS and they have great lateral stiffness.

2024 Standert Kreissäge RS - tyre and rim 2.jpg

For the tyres we have a set of Vittoria's Corsa Pros, which are stunning – very supple with great grip. But if you wish you can choose Challenge Criterium RS or Schwalbe Pro One Evo tyres instead.

2024 Standert Kreissäge RS - tyre and rim 1.jpg

Standert Kreissäge RS: Value

Standert is based in Berlin, and all orders are placed through its website, although it's worth noting that shipping to the UK will cost €220. Being in Germany, all the prices are in euros, with this build costing €6,599 – which equates to around £5,490 depending on the exchange rate at the time. A similar build but with 105 Di2 is €5,959 (£4,958) and with SRAM Force it's €6,659 or around £5,541.

In terms of competition, there aren't many scandium race bikes out there to compare the Kreissäge RS with, and none that we've actually reviewed.

Spoon Customs has the Sestriere which is available as a frameset for £1,895, or for a SRAM Rival AXS build with Zipp 303s wheels it's  £5,100. A similar sort of ballpark then.

For similar performance and weight, though, you don't necessarily need to go down the scandium route, which could save you a lot money. The Specialized Allez Sprint Comp, for example, which Liam reviewed in 2022, costs £2,600, and that's the range topper – as with most brands, aluminium doesn't make it much higher up the pecking order. You are getting 105 mechanical and basic DT Swiss wheels, but if electronic gears aren't the be all and end all for you then spending a grand on some lightweight aero wheels from the likes of Hunt or Scribe will get you a light and stiff race bike for decent money. A frameset is £1,500 if you wanted to build a complete bike from scratch.

It's the same with the Cannondale CAAD13; that model tops out at SRAM Rival AXS and DT Swiss R470 wheels, but it's quite pricey at £3,400. We reviewed the 105 model back in 2020.

Standert Kreissäge RS: Conclusion

The Kreissäge RS is designed for aggressive riding, and thanks to the stiffness on offer from the frame and fork it performs very well indeed. Like I said earlier, though, that stiffness comes at the cost of the ride quality on UK roads.

The price seems quite high, too, though I think that's partly down to the fact that most brands don't use scandium or aluminium alloys higher up their ranges. I also appreciate that the small nature of the company, and the fact that its bikes are built in Italy as opposed to the Far East, will also increase the bottom line.

The trouble is, I can't actually see the benefit of the Kreissäge RS over many of the cheaper aluminium alloy race bikes on the market; it's barely any lighter, the stiffness isn't noticeably greater in the real world, and it's not quite special enough in terms of the finish quality for the extra cash, in my opinion. It's a good bike overall, but it's not quite the full package for the price.

> Buy now: Standert Kreissäge RS for €6,599 from Standert

Verdict

All the stiffness needed for a race machine, but the ride quality isn't the best for UK roads

road.cc test report

Make and model: Standert Kreissäge RS

Size tested: 56, 55.5mm

About the bike

List the components used to build up the bike.

Shift / Brake Levers: Shimano Ultegra Di2 R8170

Rotors: Shimano MT-800 160mm (F)/140mm (R)

Derailleur Front: Shimano Ultegra Di2 R8150

Derailleur Rear: Shimano Ultegra Di2 R8150

Crankset: Shimano Ultegra R8100 52/36T

Cassette: Shimano Ultegra CS8100 11-30T 12 speed

Chain: Shimano Ultegra R8100

Handlebar: Deda SuperZero RS

Stem: Deda Superbox DCR

Saddle: Fizik Vento Argo R1

Wheelset: DT Swiss ARC 1400 50mm

Tyres: Vittoria Corsa Pro

Tell us what the bike is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about the bike?

Standert says, "The Kreissäge RS is here to get the most out of every shot you take. Stiffer, lighter and faster than ever. Made from Scandium aluminium. Fully integrated cabling. Proven race winning geometry. Simply the best racing bike we've ever made. Made to go fast, brake late, hit the apex, accelerate out of turns and sprint for whatever you are sprinting for."

It's certainly stiff and responsive.

Where does this model sit in the range? Tell us briefly about the cheaper options and the more expensive options

The frameset is available in a range of colours and builds starting with Shimano 105 Di2 and topping out with Dura-Ace Di2 or SRAM Red.

Frame and fork

Overall rating for frame and fork
 
7/10

Tell us about the build quality and finish of the frame and fork?

The paint quality is good throughout, although I did think there was a bit of a colour clash with the logos. As for the build quality, things look to be good, although I have seen neater welds at this price point.

Tell us about the materials used in the frame and fork?

The frame is made from scandium alloy tubing while the fork is full carbon fibre.

Tell us about the geometry of the frame and fork?

The geometry is very race orientated, with a long and low position achievable, steep angles, and a short wheelbase to keep the bike agile and nimble.

How was the bike in terms of height and reach? How did it compare to other bikes of the same stated size?

The stack and reach figures are as expected for the size and style of bike.

Riding the bike

Was the bike comfortable to ride? Tell us how you felt about the ride quality.

It's not as comfortable as other alloy bikes I've ridden over the years. It's firmer than most which can becoming jarring on poor UK road surfaces, even with the 28mm tyres fitted.

Did the bike feel stiff in the right places? Did any part of the bike feel too stiff or too flexible?

Stiffness is impressive right through the frame and fork.

How did the bike transfer power? Did it feel efficient?

Because of the stiffness, power transfer is impressive with no flex anywhere.

Was there any toe-clip overlap with the front wheel? If so was it a problem?

No.

How would you describe the steering? Was it lively neutral or unresponsive? Responsive.

Tell us some more about the handling. How did the bike feel overall? Did it do particular things well or badly?

The handling is quick and direct, as you'd expect from a race bike, but overall it's well balanced so that it doesn't feel twitchy.

Which components had the most effect (good or bad) on the bike's comfort? would you recommend any changes?

I know the components all offer decent levels of comfort as I have used them all on different bikes over the years. They have to work hard to offset the firm nature of the frame, though.

Which components had the most effect (good or bad) on the bike's stiffness? would you recommend any changes?

The DT Swiss wheels have great lateral stiffness and the Deda handlebar doesn't flex when you are sprinting out of the saddle.

Which components had the most effect (good or bad) on the bike's efficiency? would you recommend any changes?

The deep-section rims give a decent aero boost and the tyres are great for grip in the bends while also rolling well on the flat.

Rate the bike for efficiency of power transfer:
 
9/10
Rate the bike for acceleration:
 
8/10
Rate the bike for sprinting:
 
9/10
Rate the bike for high speed stability:
 
8/10
Rate the bike for cruising speed stability:
 
8/10
Rate the bike for low speed stability:
 
8/10
Rate the bike for flat cornering:
 
8/10
Rate the bike for cornering on descents:
 
8/10
Rate the bike for climbing:
 
8/10

The drivetrain

Rate the drivetrain for performance:
 
9/10
Rate the drivetrain for durability:
 
8/10
Rate the drivetrain for weight:
 
8/10

Tell us some more about the drivetrain. Anything you particularly did or didn't like? Any components which didn't work well together?

Shimano Ultegra Di2 is a great groupset, offering brilliant gear shifts and loads of braking power.

Wheels and tyres

Rate the wheels for performance:
 
9/10
Rate the wheels for durability:
 
8/10
Rate the wheels for weight:
 
8/10
Rate the wheels for comfort:
 
8/10

Tell us some more about the wheels.Did they work well in the conditions you encountered? Would you change the wheels? If so what for?

A light, well-built set of wheels which really suits this kind of bike.

Rate the tyres for performance:
 
9/10
Rate the tyres for durability:
 
7/10
Rate the tyres for weight:
 
8/10
Rate the tyres for comfort:
 
8/10

Tell us some more about the tyres. Did they work well in the conditions you encountered? Would you change the tyres? If so what for?

Very supple tyres that have loads of grip and great ride feel.

Controls

Rate the controls for performance:
 
8/10
Rate the controls for durability:
 
8/10
Rate the controls for weight:
 
7/10
Rate the controls for comfort:
 
8/10

Tell us some more about the controls. Any particularly good or bad components? How would the controls work for larger or smaller riders?

Good quality kit that complements the frame and fork.

Your summary

Did you enjoy riding the bike? Yes, on smooth roads.

Would you consider buying the bike? No

Would you recommend the bike to a friend? Yes, especially if they were racing.

How does the price compare to that of similar bikes in the market, including ones recently tested on road.cc?

Spoon Custom's Sestriere is a custom built scandium alloy race bike that's in the same sort of ball park price-wise. Other than that, there aren't many scandium-framed bikes out there, although aluminium alloy-framed bikes from the big brands offer similar performance for a lot less money.

Rate the bike overall for performance:
 
8/10
Rate the bike overall for value:
 
4/10

Use this box to explain your overall score

From a performance point of view the Standert delivers, it just doesn't deliver as well on the ride quality front as other alloy bikes I've ridden over the years that can match it for stiffness. It's for that reason that the Kreissäge RS is just shy of an 8 overall.

Overall rating: 7/10

About the tester

Age: 44  Height: 180cm  Weight: 76kg

I usually ride: This month's test bike  My best bike is: B'Twin Ultra CF draped in the latest bling test components

I've been riding for: Over 20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed,

Since writing his first bike review for road.cc back in early 2009 senior product reviewer Stu has tested more than a thousand pieces of kit, and hundreds of bikes.

With an HND in mechanical engineering and previous roles as a CNC programmer/machinist, draughtsman and development engineer (working in new product design) Stu understands what it takes to bring a product to market. A mix of that knowledge combined with his love of road and gravel cycling puts him in the ideal position to put the latest kit through its paces.

He first made the switch to road cycling in 1999, primarily for fitness, but it didn’t take long for his competitive side to take over which led to around ten years as a time triallist and some pretty decent results. These days though riding is more about escapism, keeping the weight off and just enjoying the fact that he gets to ride the latest technology as part of his day job.

Add new comment

9 comments

Avatar
froze | 3 weeks ago
0 likes

It's extremely overpriced, considering you can get what is rated as the best aluminum racing bike made, the Cannondale CAAD 12 with DA components, for a couple of hundred less than $4,000!

Avatar
mark1a replied to froze | 3 weeks ago
4 likes
froze wrote:

It's extremely overpriced, considering you can get what is rated as the best aluminum racing bike made, the Cannondale CAAD 12 with DA components, for a couple of hundred less than $4,000!

You'd still need a lot more money than that to invent the time-machine you'd need to take yourself back 5 years to 2019 and buy that model at that price though. 

Avatar
froze replied to mark1a | 3 weeks ago
2 likes
mark1a wrote:
froze wrote:

It's extremely overpriced, considering you can get what is rated as the best aluminum racing bike made, the Cannondale CAAD 12 with DA components, for a couple of hundred less than $4,000!

You'd still need a lot more money that that to invent the time-machine you'd need to take yourself back 5 years to 2019 to buy that model at that price though. 

Well, thanks for correcting me, I thought that bike was still in production!  That bike was great though, too bad, so sad it's gone.

 

Avatar
mark1a replied to froze | 3 weeks ago
1 like
froze wrote:

Well, thanks for correcting me, I thought that bike was still in production!  That bike was great though, too bad, so sad it's gone.

No problem at all old chap, its successor the CAAD13 is available in mechanical 105 11sp guise (not too shabby a groupset IMO with Shimano trickle down) albeit with entry level wheels (DT Swiss R470) here in the UK for £1599 (probably not much more USD).

https://www.sigmasports.com/item/Cannondale/Caad13-105-Disc-Road-Bike/X5EM

Add on the equivalent wheels that Rendel mentioned, plus some extra upgrades that could come as and when afforded, it's a great start out of the shop. My first Roubaix ended up as a bit of a "Trigger's Broom" in that respect.

Notwithstanding all that, the Standert model here looks great value IMO for people who want an up-spec alu bike from the start without the upgrade path. 

Avatar
Rendel Harris replied to froze | 3 weeks ago
1 like
froze wrote:

It's extremely overpriced, considering you can get what is rated as the best aluminum racing bike made, the Cannondale CAAD 12 with DA components, for a couple of hundred less than $4,000!

As the CAAD12 ceased production in 2018 you can add at least 25% to that price for inflation and around an extra grand for the electronic groupset and another £800 for the wheelset (Mavic Ksyrium on the CAAD12 DA around £650 (2024 prices), DT Swiss used on this around £1450), so it's not really a valid comparison. If the CAAD12 were still made today with Ultegra Di2 and DT Swiss 1400 wheels it would be pretty close to this price.

Avatar
purple2585 | 4 weeks ago
0 likes

Like the perceived ride feel, I think that the review is a bit harsh.

I owned a Kreissäge and it's probably my favourite so far, felt fast and nimble. Super responsive in handling and power transfer, I found it an absolute joy to ride on the well-paved roads of the Netherlands, Spain, and the Alps. No comfort issues on longer rides (equiped with carbon seat post / bars, 28/26mm tires).

Definitely understandable that this bike is not ideal for UK roads, they're pretty rotten. Then again, that feels like critiquing an endurance road bike for being harsh on gravel; for what it sets out to do, it's great. Horses for courses.

Avatar
MattieKempy | 4 weeks ago
0 likes

Looks like a great bike, but I'd be far more interested in a review of the Standert Pfadfinder if the opportunity arises, road.cc

Avatar
anke2 replied to MattieKempy | 4 weeks ago
0 likes

According to the review, the bike is a bit vanilla. 

The colour scheme (gold accents on British racing green?) is wonderful, the oversized decals are a bit silly, the head tube would be OK on a fat bike...

The price seems crazy for an aluminium frame, especially when it is alloyed with dirty rare earth metals that do not add any value.

But Standert seems to have a following - sometimes, I think it deserves to be milked...  3

Avatar
MrSimonMills replied to MattieKempy | 3 weeks ago
0 likes

I have one, it is lovely to ride - easily my favourite bike (although pretty useless on anything techy due to quite a steep head angle)

Latest Comments