Support road.cc

Like this site? Help us to make it better.

Tyre Glider tyre lever

8
£9.99

VERDICT:

8
10
Compact, innovative and easy way to get most tyres on and off with a minimum of fuss
Saves your thumbs on tight tyres
Reduces risk of pinching an inner tube
You only need one
Faster and easier than regular levers
Short, blunt hook difficult with tight beads
Won't work on hookless rims
Won't work on some wide-hook rims, like Zipp's
No left-handed version
Weight: 
20g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Tyre Glider is a unique new tool that's well-suited to removing or fitting most tyres on most rims, easy or stubborn. It's not perfect and won't work on some rims, but it's small and works much better than most tyre levers, most of the time.

Over the years various contraptions have appeared that aim to update the humble tyre lever, and with varying degrees of success. I didn't rate the TyreKey tool, for instance, but others have had success with 'tyre jacks' like the Kool-Stop Tyre Mate.

> Buy now: Tyre Glider tyre lever from Amazon for £12.99

Whilst the Tyre Mate has glowing reviews, it's also huge – no way is it going in a saddlebag, and it's too big to carry as a might-need-it in a jersey pocket. There's got to be a better way.

Invented in Wales during the Covid lockdown and inspired by opening a can of tuna, the Tyre Glider is fatter than a couple of levers (40 x 30mm at its chunkiest), but considerably shorter than most at 78mm. It easily disappears into a saddlebag or pocket, and being red it's easy to find. The plastic is a special low-friction type, formed from recycled materials. Nice. The design is under a patent application.

By far the best way to understand how it works is to watch the video on the Tyre Glider website.

There's a hook that goes under the bead, but as the tip is a blunt 3mm thick – great for strength – it's not great with tight beads where you may have fractions of a millimetre clearance. It's also 35mm long, leading to a lot of wriggling to get under all but the loosest of beads. With a stiff tyre sidewall or chunky tread to bend out of the way, it can prove challenging.

2022 Tyre Glider tyre lever 3.jpg

Because you aren't working multiple pointy objects under the bead, there's far less risk of pinching a tube / putting a hole in your tubeless rim tape, however.

On several tyres I had to first break the bead away from the rim wall and push it into the centre channel to get enough slack. Any 2.0 version should feature a deeper, sharper hook to make getting started easier.

Beady eye

One note for users of tight-fitting tubeless tyre systems: you might find the bead requires more force to unseat than you are capable of trailside. I've had to resort to standing on tyres to break the bead before, so it's wise to make sure you can actually do it before relying solely on a Tyre Glider for trail use.

Once you're in, you use the 78mm of leverage on hand like a handle – the Tyre Glider sits flush against the rim, sticking out. That handle gives plenty of grip to push or pull around the rim, quickly unseating the tyre as you go.

Re-seating the bead is a different process. Once you've pushed a short section of bead over the rim, you clip the Tyre Glider onto the right-hand rim wall as you look down at the wheel between your legs. You then push it forward around the rim, where the bulged section guides the bead over the rim in a most satisfying manner.

Thumb a lift

I found as you near the end of the lap the effort increases considerably – for tight tyres the trick is to leave the tool in place at this point, then go back around and push the bead into the rim centre with your thumbs, creating slack to then easily complete the process.

> Cycling emergency essentials: the 10 things you should take with you on every ride

The Tyre Glider is good for rim hook profiles up to 3.3mm wide – that's the widest rim hook section it will engage. Reports are that Zipp 404 rims won't fit the tool, and Zipp 202 rim hooks are likewise about 4mm wide, so they're probably out too. I didn't try it on any hookless rims, but as there's literally no hook to hold the tool down on as you push it around, I'd say it would be a non-starter.

Hook both ways

I'm left-handed, and had no issues using the tool. I can appreciate some may struggle though, and it would be nice to see an option for working in the other direction. At least when removing a tyre it is possible to pull the tool instead of pushing it.

Omitting workshop-only tools, the Tyre glider is up against the traditional two-piece lever set, of which we've reviewed many. If a tyre is spectacularly recalcitrant three levers may be needed, so it could be saving a fair bit of space in your seatpack, frame bag or pocket.

Value

At £9.99 each plus £2.99 delivery these work out at £12.98 – you only need one – and really it's still a bargain. The TYRE LEVER Hutchinson Stick are a more traditional way of dealing with tight tyres, and very good, but £14.95. The Lezyne Lever Patch kit is still around and still cheaper at £9, though, and uses composite levers as sides on a neat aluminium body.

Overall

The Tyre Glider is the first genuinely innovative cycling tool I've seen in a long time - not just an improvement, but completely new thinking. As mentioned there are some caveats around technique, and I'd like to see the hook portion be sharper to get under tight beads easier, but for most tyres on most rims it should be fine.

Verdict

Compact, innovative and easy way to get most tyres on and off with a minimum of fuss

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: Tyre Glider tyre lever

Size tested: n/a

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

Tyre Glider says: "The Tyre Glider is a small and compact evolution of the tyre levers currently on the market. It's unique design and features ensures that changing a bicycle tyre is now accessible to all individuals and completes the task in a more efficient manner allowing for the swift removal and installation of even the most tight-fitting tyres across all the bicycle disciplines."

Tell us some more about the technical aspects of the product?

TOP FEATURES OF THE TYRE GLIDER

Safe for most types of rims and tyre widths

The wide scoop design of the tool makes it safe for all types of rims and enables cyclists to easily take their tyres off and on.

Clips securely to tyre

The tool clips onto the rim of the tyre, ensuring faster and more efficient tyre installations. The unique clip design also ensures cyclists no longer have to use their thumbs to remove or replace a tyre, which can be painful and dangerous

Tackles tight tyres

Tackle tight tyres with ease and speed with the Tyre Glider. If you're struggling to remove and install an impossibly tight tyre and often end up with a pinched tube, our no-pinch tool can deliver the results you need.

Strong plastic

Although the Tyre Glider is small and compact in size, it's made from incredibly strong and durable plastic. This ensures you can throw it in a bag and take it with you on off-road cycling adventures without having to worry about the tool becoming damaged or reducing in quality. Even when placed under intense pressure, the tool will not snap.

Sustainable

At Tyre Glider, we're not only passionate about cycling, we're passionate about protecting the world around us. Every tool we create is made from recycled materials and sustainable sources. Enjoy the great outdoors with the help of your Tyre Glider, safe in the knowledge you're helping to protect the environment.

User-friendly

Our product is suitable for beginner and experienced cyclists. No matter how frequently or far you cycle, it's essential you have the tools to properly maintain your bike and care for your tyres.

Rate the product for quality of construction:
 
9/10

Solidly made from recycled materials – feels tough as old boots.

Rate the product for performance:
 
8/10

Much quicker than tyre levers.

Rate the product for durability:
 
8/10

Thick and strong.

Rate the product for weight (if applicable)
 
8/10

20g is good against 2-3 levers.

Rate the product for comfort (if applicable)
 
8/10

Doesn't hurt your hands.

Rate the product for value:
 
7/10

For its speed and ease it's great value.

Tell us how the product performed overall when used for its designed purpose

Performance is great once you learn the technique.

Tell us what you particularly liked about the product

The satisfaction of a quick install.

Tell us what you particularly disliked about the product

The challenge getting a tight bead hooked yo remove.

How does the price compare to that of similar products in the market, including ones recently tested on road.cc?

It's at the expensive end for tyre levers, but not unreasonably priced for what it offers.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes

Would you recommend the product to a friend? Yes

Use this box to explain your overall score

With a sharper hook for dealing with tight beads, and the ability to fit deeper-hooked rims like the Zipp Firefrests, the Tyre Glider would be a nine. As it is, it's still very good.

Overall rating: 8/10

About the tester

Age: 47  Height: 183cm  Weight: 77kg

I usually ride: Sonder Camino Gravelaxe  My best bike is: Nah bro that's it

I've been riding for: Over 20 years  I ride: A few times a week  I would class myself as: Expert

I regularly do the following types of riding: cyclo cross, general fitness riding, mtb, G-R-A-V-E-L

Latest Comments